Instruction manual RBL4
Please keep this instruction manual for future reference
10
BEFORE USING YOUR FRIDGE
-
When the appliance is situated for the first time or after
transportation, keep your fridge in the upright position for 12 hours
before connecting to the mains electricity. Otherwise, you may
damage the compressor.
-
Your fridge may have a smell when it is operated for the first time;
the smell will fade away when your fridge starts to cool.
HOW TO OPERATE THE APPLIANCE
Thermostat setting
The thermostat automatically
regulates the inside
temperature of the
refrigerator. By rotating the
knob from position 1 to 5,
colder temperatures can be
obtained.
IMPORTANT NOTE:
Do not try to rotate knob beyond 1 position it will stop your appliance.
- For short-term storage of food in the fridge, you can set the knob between
minimum and medium position (1-3).
- For long-term storage of food in the fridge, you can set knob medium
position (3-4).
- Note that; the ambient temperature, temperature of the freshly stored food and
how often the door is opened, affects the temperature in the fridge. If required,
change the temperature setting.
- When you first switch on the appliance, you should ideally try to run it without
any food in for 24 hours and not open the door. If you need to use it straight
away, try not to put much food inside.
- If the unit is switched off or unplugged, you must allow at least 5 minutes before
restarting in order not to damage the compressor.
- Larders (coolers) do not have a freezer compartment but can cool up to 4 - 6 °C.
RBL4 - Instruction Manual.indd 10
18/04/2016 15:49
