Caple FOS/4IN1/BS, Инструкция по эксплуатации

Страница: 20 / 24

Please keep this instruction manual for future reference
Instruction manual FOS/4IN1
20
Figure 2
N O T E :
The flush water will be milky or cloudy at first. This is due to the dispersing air and will clear
up quickly after flushing the cartridges with appropriate volume of water. Now check that the
cartridge position is correct by ensuring the mark on the filter cartridge aligns with the larger
recession of the wall mounting bracket. When inserting the cartridge, check the position of the
cartridge label. This should face forwards once in the end position so that all of the necessary
information is visible.
For further information please refer to the manual supplied with your filter.
3. Remove the new filter cartridge from its packaging and check for any damage.
4. Insert the filter cartridge into the filter head and turn the cartridge clockwise until it stops and
end position is reached. The flow in the filter head is reopened and the system vented and
flushed via the flush/ pressure release valve. Flush filter for 10 litres.
5. Close the flush/pressure release valve (see figure 2) - the system is now ready for use.
6. After replacing the filter cartridge, check all components for seal integrity, water must not
escape from any point.