Instruction manual DI632
13
Please keep this instruction manual for future reference
W A T E R S O F T E N E R
The water softener must be set manually, using the water hardness dial.
The water softener is designed to remove minerals and salts from the water, which would have a
detrimental or adverse effect on the operation of the appliance.
The higher the content of these minerals and salts, the harder your water is.
The softener should be adjusted according to the hardness of the water in your area. Your local
Water Authority can advise you on the hardness of the water in your area.
A D J U S T I N G S A LT C O N S U M P T I O N
The dishwasher is designed to allow for adjustment in the amount of salt consumed based
on the hardness of the water used. This is intended to optimise and customise the level of
salt consumption.
Please follow the steps below for adjustment in salt consumption:
1. Open the door and Switch on the appliance.
2. Press the Programme button for more than 5 seconds to start the water softener setting within
60 seconds after the appliance was switched on (The Salt and Rinse Aid warning lights will be
on periodically when it is in this setting mode).
3. Press the Programme button to select the proper setting according to your local environment,
the settings will change in the following sequence: H1 H2 H3 H4 H5 H6
4. Press the Power button to end the set up mode.
W AT E R H A R D N E S S
WATER
SOFTENER
LEVEL
SALT
CONSUMPTION
(GRAM/CYCLE)
GERMAN °DH
FRENCH °FH
BRITISH °CLARKE
MMOL/L
0~5
0~9
0~6
0~0.94
H1
0
6-11
10-20
7-14
1.0-2.0
H2
9
12-17
21-30
15-21
2.1-3.0
H3
12
18-22
31-40
22-28
3.1-4.0
H4
20
23-34
41-60
29-42
4.1-6.0
H5
30
35-55
61-98
43-69
6.1-9.8
H6
60
°dH=1.25 °Clarke=1 1.78°fH=0.178mmol/l
The manufactory setting: H3