Instruction manual Di481
15
Please keep this instruction manual for future reference
9
To open the dispenser, turn the cap t o t he "open" (left) arrow and lift it out.
Pour the rinse aid into the dispenser, being careful not to overfill.
Replace the cap by inserting it aligned wit h "open" arrow and turning it to the closed (right) arrow.
Adjusting Rinse Aid Dispenser
The rinse aid dispenser has six or four settings. Always start with the dispenser
set on "4". If spots and poor drying are a problem, incre ase the amount of rinse
aid dispensed by removing the dispenser lid and rotating the dial to "5". If the
dishes still are not drying properly or are show spots, adjust the dial to the next
hig her lever until your dishes are spo t-free. The recommended setting is "4".
(Factor y value is "4".)
Increase the dose if there are drops of water or lime spots on t he dishes af ter washing.
Reduce it if there are sticky whitish stains on your dish es or a bluish film on glassware or
knife blades.
1
2
3
As the rinse aid diminishes, the size of the black dot
on the rinse aid level indicator changes, as illustrated below.
Full
3 / 4 full
1 / 2 full
1 / 4 full - Should refill to eliminate spotting
Empty
When to Refill the Rinse Aid Dispenser
If there is no rinse-aid warning light in the control panel, you can estimate the amount from the colour
of the optical level indicator C located next to the cap. When the rinse-aid container is full, the whole
indicator will be dark .As the rinse-aid diminishes, the size of the dark dot decreases. You should never let
the rinse aid level fall 1 / 4 full.
during the next wash. Don't forget to replace the cap before you close dishwasher door.
Clean up any rinse aid spilled while during filling with an absorbent cloth to avoid excessive foaming
Detergents with its chemical ingredients are necessary to remove dirt, crush dirt and transport it out of the dishwasher.
Most of the commercial quality detergents are suitable for this purpose.
" "
Proper Use of Detergent
Use only detergent specifically made for the use in dishwashers. Keep your detergent fresh and dry.
Don't put powdered detergent into the dispenser until you're ready to wash dishes.
Attention!
W H E N TO R E F I L L T H E R I N S E A I D D I S P E N S E R
The Rinse Aid warning light in the control panel will illuminate when the dispenser needs re-filling.
You can also estimate the remaining amount from the colour of the optical level indicator “C“
located next to the cap. When the Rinse Aid container is full, the whole indicator will be dark. As
the Rinse Aid diminishes, the size of the dark dot decreases. You should never let the Rinse Aid
level fall 1 / 4 full.
As the Rinse Aid diminishes, the size of the black dot on the Rinse Aid level indicator changes, as
illustrated below:
Full
¾ full
½ full
¼ full - Should refill to eliminate spotting
Empty
9
To open the dispenser, turn the cap t o t he "open" (left) arrow and lift it out.
Pour the rinse aid into the dispenser, being careful not to overfill.
Replace the cap by inserting it aligned wit h "open" arrow and turning it to the closed (right) arrow.
Adjusting Rinse Aid Dispenser
The rinse aid dispenser has six or four settings. Always start with the dispenser
set on "4". If spots and poor drying are a problem, incre ase the amount of rinse
aid dispensed by removing the dispenser lid and rotating the dial to "5". If the
dishes still are not drying properly or are show spots, adjust the dial to the next
hig her lever until your dishes are spo t-free. The recommended setting is "4".
(Factor y value is "4".)
Increase the dose if there are drops of water or lime spots on t he dishes af ter washing.
Reduce it if there are sticky whitish stains on your dish es or a bluish film on glassware or
knife blades.
1
2
3
As the rinse aid diminishes, the size of the black dot
on the rinse aid level indicator changes, as illustrated below.
Full
3 / 4 full
1 / 2 full
1 / 4 full - Should refill to eliminate spotting
Empty
When to Refill the Rinse Aid Dispenser
If there is no rinse-aid warning light in the control panel, you can estimate the amount from the colour
of the optical level indicator C located next to the cap. When the rinse-aid container is full, the whole
indicator will be dark .As the rinse-aid diminishes, the size of the dark dot decreases. You should never let
the rinse aid level fall 1 / 4 full.
during the next wash. Don't forget to replace the cap before you close dishwasher door.
Clean up any rinse aid spilled while during filling with an absorbent cloth to avoid excessive foaming
Detergents with its chemical ingredients are necessary to remove dirt, crush dirt and transport it out of the dishwasher.
Most of the commercial quality detergents are suitable for this purpose.
" "
Proper Use of Detergent
Use only detergent specifically made for the use in dishwashers. Keep your detergent fresh and dry.
Don't put powdered detergent into the dispenser until you're ready to wash dishes.
Attention!
C
(Rinse-Aid indicator)
1. To open the dispenser, turn the cap to the “open” (left) arrow and lift it out.
2. Pour the Rinse Aid into the dispenser, being careful not to overfill.
3. Replace the cap by inserting it aligned with “open” arrow and turning it to the closed
(right) arrow.
N OT E :
Clean up any Rinse Aid spilled during filling with an absorbent cloth to avoid excessive foaming
during the next wash. Don’t forget to replace the cap before you close dishwasher door.
Di481 Intergrated Dishwasher Instruction Manual .indd 15
Di481 Intergrated Dishwasher Instruction Manual .indd 15
17/07/2020 15:17
17/07/2020 15:17