Caple Di465, Техническая информация

Страница: 21 / 75

With the door opened and machine off, press the Program button. Hold down the Program
button and press the POWER button until the machine enter into Test Program. The
appliance will pause and stand by(as step 00). At the moment, all the indicator which are
under control are light and flash with frequence of 2 Hz. Then, close the door to activate the
test program.
How to activate Test Program
During test program running you can press program button to jump into next
step except inlet valve step
Priority level of E4 is the highest. E4 operation is valid after other error
operations have done. When E4 operation has done, all the others are invalid.
In test program, E1, E3, E4, E6 and E7 are valid.
,
( ).
Attention
In order to check the operation of components of appliance and find out the malfunction, we
designed this program for technician.
Test Program
60
5
Half washing button:To select half washing.
(Optional half washing means that the lower spray arm
does not run, so you should load the upper basket only).
Power on light: To come on when Power ON/OFF
button is pressed down.
11
2
3
4
ON/OFF Button: Will turn on/off the power supply.
6
Program button: To select washing program
when the button is pressed.
Delayed Start Button: Press this button to set the
delayed hours for washing. You can delay the start
of washing up to 24 hours. One press on this
button delays the start of washing by one hour.
11 2
3 4
5
6
Display Window: delay time, running indicator,
fault codes etc.
On
Off
Prog. Delay
Di617
1 2
//
Control panel
Model: DI617 DI465