Caple CM400FA, Инструкция по эксплуатации, Страница: 26 / 34

This function makes it possible to remove
incorrect functioning data and to reinstate the
Standard Programming settings (see
PRESET
SETTINGS chart).
Proceed as follows:
• Release voltage by turning the main switch
off ( OFF ).
• Reinstate voltage by turning the main switch
on ( ON ) and simultaneously pressing down
on the keys ENTER and RESET ;
until the display reads:
56
UK
This function allows you to reset the total
amount of water used.
Proceed as follows:
• Release voltage by turning the main switch
off ( OFF ).
• Reinstate voltage by turning the main switch
on ( ON ) and pressing down on the key:
until the display reads:
This function makes it possible to reset the total
number of washing cycles.
Proceed as follows:
• Release voltage by turning the main switch
off ( OFF ).
• Reinstate voltage by turning the main switch
on ( ON ) and pressing down on the key:
until the display reads:
9.
SPECIAL MACHINE SCALING FUNCTIONS
9.1
RESETTING THE
CLEANING FILTER
LITRE COUNTER
9.2
RESETTING WASHING
CYCLES
9.3
RESETTING MACHINE
PARAMETRES
+
SCM5
This function makes it possible to activate the
motor manually forming the automation of the
manual coffee delivery group. Proceed as fol-
lows:
• Release voltage by turning the main switch
off (OFF).
• Reinstate voltage by turning the main switch
on (ON) and simultaneously pressing down
until the display reads:
IMPORTANT : When the machine is switched
on, since the arrow key 4 is
used to access this site, the
piston will automatically start
to move downwards.
• Press the arrow key 4 to move the piston
DOWNWARDS .
• Press the arrow key 2 to move the piston
UPWARDS .
• Release and reinstate voltage using the
main switch to end the procedure.
9.4
HANDLING MANUAL
COFFEE DELIVERY
GROUP
+
SCM5_UK_Rev_2.qxp 23/01/2008 15.59 Pagina 56