Instruction manual CM111, CM111SS & CM111GM
22
Please keep this instruction manual for future reference
Turbo grill
- Default temperature 200°C (Temperature range 50-220°C).
To adjust the temperature press
°C/W/g
followed by / . Press
SELECT
to confirm.
The default time is 1.00hr. To Adjust the time, press the button followed by
the / and
SELECT
to confirm.
Finally press to start the programme.
Microwave & Fan heat
Microwave default power P50 (Power range P10-P50).
Fan heat default temperature 200°C (Temperature range 50-220°C).
Press
°C/W/g
once to enter the Microwave power mode, and then again to
enter the fan heat temperature mode. These can both then be adjusted using the
/ keys followed by
SELECT
to confirm.
The default time is 1.00hr. To Adjust the time, press the button followed
by the / and
SELECT
to confirm.
Finally press to start the programme.
MICROWAVE OVEN FUNCTIONS
Press PROG to select the following function
s:
Symbol
Descri
ption
Display
Microwave & Turbo grill
Microwave default power P50 (Power range P10-P50).
Turbo grill default temperature 200°C (Temperature range 50-220°C).
Press
°C/W/g
once to enter the Microwave power mode, and then again to
enter the Turbo grill temperature mode. These can both then be adjusted using
the / keys followed by
SELECT
to confirm.
The default time is 1.00hr. To Adjust the time, press the button followed
by the / and
SELECT
to confirm.
Finally press to start the programme.
Microwave & Turbo conventional heat
Microwave default power P50 (Power range P10-P50).
Turbo grill default temperature 200°C (Temperature range 50-220°C).
Press
°C/W/g
once to enter the Microwave power mode, and then again to
enter the Turbo conventional temperature mode. These can both then be
adjusted using the / keys followed by
SELECT
to confirm.
The default time is 1.00hr. To Adjust the time, press the button followed by
the / and
SELECT
to confirm.
Finally press to start the programme.
Microwave
– Default power P100 (power range P10-P100).
To adjust the power, press / until the correct power is reached followed by
SELECT
.
Default time is 1 minute. To Adjust the time, press the button followed by
the / and
SELECT
to confirm.
Finally press to start the programme.
Defrost -
Default weight 1000g (weight range 100-2000g).
To adjust the weight press the
°C/W/g
button followed by the / and
SELECT
to confirm.
Finally press to start the programme. The default time will be adjusted
according to the set weight (See the 'Defrost time table' for more info).
Fan heat -
Default temperature 200°C
To adjust the temperature press
°C/W/g
followed by / . Press
SELECT
to
confirm.
The default time is 1.00hr. To Adjust the time, press the button followed by
the / and
SELECT
to confirm.
Finally press to start the programme.
Turbo conventional
- Default temperature 200°C (Temperature range 50-220°C).
To adjust the temperature press
°C/W/g
followed by / . Press
SELECT
to
confirm.
The default time is 1.00hr. To Adjust the time, press the button followed by
the / and
SELECT
to confirm.
Finally press to start the programme.
M I C R OWAV E :
Default power P100 (power range P10-P100).
To adjust the power, press
Time setting
Time zone can show “Time, Duration time, End of cooking time and Alarm” in this sequence:
All time settings can be operated by pressing
/
,
SELECT
,
and
Alarm setting
To set the Alarm/minute minder, press the button until the symbol starts to flash. Use /
to adjust the time, and then press
SELECT
to confirm. If you want to cancel the alarm, set the alarm
time back to '0.00' and press
SELECT
to confirm.
When the time is up, the alarm will sound for 90 seconds, and the symbol will begin to flash. To
stop the alarm, press either , , or
SELECT.
Setting the time
To set the time, turn the oven on, and then press and hold the button for 3 seconds until the
time begins to flash. Adjust the time using the / and then press SELECT to confirm.
when the oven is first turned on or restarts, the time must be set before using the oven.
Duration cooking(0-10hrs)
Once a function and temperature have been selected, press the button and the Duration time
will start to flash. press / to adjust the time, and then SELECT to confirm. Once the time is
up, the alarm will sound and the oven will switch off.
Press any of the buttons to turn off the alarm
To cancel Duration cooking set the cooking time to '0:00' and confirm.
/
,
SELECT
,
and
End cooking time
Once the Duration cooking time has been set, press twice and the End cooking time should
start to flash. Adjust the time to the time you wish cooking to stop and press SELECT to confirm.
Your oven will then work out when to turn on, so that it cooks for the required duration time, and
finishes at the required end time. E.g. Duration time set at 30 minutes, and the end time set to
18.15, the oven will automatically turn on at 17.45 and cook for 30 minutes on the set function and
temperature (start time = End time - duration time).
Child lock
Press and hold SELECT for 5 seconds to set the child lock. The symbol will appear in the display
once activated.
To cancel the Child lock, press and hold SELECT again for 5 seconds. The symbol will disappear
from the display once deactivated.
until the correct power is reached
followed by
SELECT
.
Default time is 30 seconds. To adjust the time press the
Alarm setting
To set the Alarm/minute minder, press the button until the symbol starts to flash. Use /
to adjust the time, and then press
SELECT
to confirm. If you want to cancel the alarm, set the alarm
time back to '0.00' and press
SELECT
to confirm.
When the time is up, the alarm will sound for 90 seconds, and the symbol will begin to flash. To
stop the alarm, press any button.
Setting the time
To set the time, turn the oven on, and then press and hold the button for 3 seconds until the
time begins to flash. Adjust the time using the / and then press SELECT to confirm.
when the oven is first turned on or restarts, the time must be set before using the oven.
Duration cooking(0-10hrs)
Once a function and temperature have been selected, press the button and the Duration time
will start to flash. press / to adjust the time, and then SELECT to confirm. Once the time is
up, the alarm will sound and the oven will switch off.
Press any of the buttons to turn off the alarm
/
,
SELECT
,
and
To cancel Duration cooking set the cooking time to '0:00' and confirm.
End cooking time
Once the Duration cooking time has been set, press twice and the End cooking time should
start to flash. Adjust the time to the time you wish cooking to stop and press SELECT to confirm.
Your oven will then work out when to turn on, so that it cooks for the required duration time, and
finishes at the required end time. E.g. Duration time set at 30 minutes, and the end time set to
18.15, the oven will automatically turn on at 17.45 and cook for 30 minutes on the set function and
temperature (start time = End time - duration time).
button
followed by the
Time setting
Time zone can show “Time, Duration time, End of cooking time and Alarm” in this sequence:
All time settings can be operated by pressing
/
,
SELECT
,
and
Alarm setting
To set the Alarm/minute minder, press the button until the symbol starts to flash. Use /
to adjust the time, and then press
SELECT
to confirm. If you want to cancel the alarm, set the alarm
time back to '0.00' and press
SELECT
to confirm.
When the time is up, the alarm will sound for 90 seconds, and the symbol will begin to flash. To
stop the alarm, press either , , or
SELECT.
Setting the time
To set the time, turn the oven on, and then press and hold the button for 3 seconds until the
time begins to flash. Adjust the time using the / and then press SELECT to confirm.
when the oven is first turned on or restarts, the time must be set before using the oven.
Duration cooking(0-10hrs)
Once a function and temperature have been selected, press the button and the Duration time
will start to flash. press / to adjust the time, and then SELECT to confirm. Once the time is
up, the alarm will sound and the oven will switch off.
Press any of the buttons to turn off the alarm
To cancel Duration cooking set the cooking time to '0:00' and confirm.
/
,
SELECT
,
and
End cooking time
Once the Duration cooking time has been set, press twice and the End cooking time should
start to flash. Adjust the time to the time you wish cooking to stop and press SELECT to confirm.
Your oven will then work out when to turn on, so that it cooks for the required duration time, and
finishes at the required end time. E.g. Duration time set at 30 minutes, and the end time set to
18.15, the oven will automatically turn on at 17.45 and cook for 30 minutes on the set function and
temperature (start time = End time - duration time).
Child lock
Press and hold SELECT for 5 seconds to set the child lock. The symbol will appear in the display
once activated.
To cancel the Child lock, press and hold SELECT again for 5 seconds. The symbol will disappear
from the display once deactivated.
and
SELECT
to confirm.
The time will increase in 30 seconds increments (Max 60mins).
Note: The Duration time when using the microwave function will display
‘minutes : seconds’, in all other functions it will show ‘hours : minutes’.
Finally press
Turbo grill
- Default temperature 200°C (Temperature range 50-220°C).
To adjust the temperature press
°C/W/g
followed by / . Press
SELECT
to confirm.
The default time is 1.00hr. To Adjust the time, press the button followed by
the / and
SELECT
to confirm.
Finally press to start the programme.
Microwave & Fan heat
Microwave default power P50 (Power range P10-P50).
Fan heat default temperature 200°C (Temperature range 50-220°C).
Press
°C/W/g
once to enter the Microwave power mode, and then again to
enter the fan heat temperature mode. These can both then be adjusted using the
/ keys followed by
SELECT
to confirm.
The default time is 1.00hr. To Adjust the time, press the button followed
by the / and
SELECT
to confirm.
Finally press to start the programme.
MICROWAVE OVEN FUNCTIONS
Press PROG to select the following function
s:
Symbol
Descri
ption
Display
Microwave & Turbo grill
Microwave default power P50 (Power range P10-P50).
Turbo grill default temperature 200°C (Temperature range 50-220°C).
Press
°C/W/g
once to enter the Microwave power mode, and then again to
enter the Turbo grill temperature mode. These can both then be adjusted using
the / keys followed by
SELECT
to confirm.
The default time is 1.00hr. To Adjust the time, press the button followed
by the / and
SELECT
to confirm.
Finally press to start the programme.
Microwave & Turbo conventional heat
Microwave default power P50 (Power range P10-P50).
Turbo grill default temperature 200°C (Temperature range 50-220°C).
Press
°C/W/g
once to enter the Microwave power mode, and then again to
enter the Turbo conventional temperature mode. These can both then be
adjusted using the / keys followed by
SELECT
to confirm.
The default time is 1.00hr. To Adjust the time, press the button followed by
the / and
SELECT
to confirm.
Finally press to start the programme.
Microwave
– Default power P100 (power range P10-P100).
To adjust the power, press / until the correct power is reached followed by
SELECT
.
Default time is 1 minute. To Adjust the time, press the button followed by
the / and
SELECT
to confirm.
Finally press to start the programme.
Defrost -
Default weight 1000g (weight range 100-2000g).
To adjust the weight press the
°C/W/g
button followed by the / and
SELECT
to confirm.
Finally press to start the programme. The default time will be adjusted
according to the set weight (See the 'Defrost time table' for more info).
Fan heat -
Default temperature 200°C
To adjust the temperature press
°C/W/g
followed by / . Press
SELECT
to
confirm.
The default time is 1.00hr. To Adjust the time, press the button followed by
the / and
SELECT
to confirm.
Finally press to start the programme.
Turbo conventional
- Default temperature 200°C (Temperature range 50-220°C).
To adjust the temperature press
°C/W/g
followed by / . Press
SELECT
to
confirm.
The default time is 1.00hr. To Adjust the time, press the button followed by
the / and
SELECT
to confirm.
Finally press to start the programme.
to start the programme.
Turbo grill
- Default temperature 200°C (Temperature range 50-220°C).
To adjust the temperature press
°C/W/g
followed by / . Press
SELECT
to confirm.
The default time is 1.00hr. To Adjust the time, press the button followed by
the / and
SELECT
to confirm.
Finally press to start the programme.
Microwave & Fan heat
Microwave default power P50 (Power range P10-P50).
Fan heat default temperature 200°C (Temperature range 50-220°C).
Press
°C/W/g
once to enter the Microwave power mode, and then again to
enter the fan heat temperature mode. These can both then be adjusted using the
/ keys followed by
SELECT
to confirm.
The default time is 1.00hr. To Adjust the time, press the button followed
by the / and
SELECT
to confirm.
Finally press to start the programme.
MICROWAVE OVEN FUNCTIONS
Press PROG to select the following function
s:
Symbol
Descri
ption
Display
Microwave & Turbo grill
Microwave default power P50 (Power range P10-P50).
Turbo grill default temperature 200°C (Temperature range 50-220°C).
Press
°C/W/g
once to enter the Microwave power mode, and then again to
enter the Turbo grill temperature mode. These can both then be adjusted using
the / keys followed by
SELECT
to confirm.
The default time is 1.00hr. To Adjust the time, press the button followed
by the / and
SELECT
to confirm.
Finally press to start the programme.
Microwave & Turbo conventional heat
Microwave default power P50 (Power range P10-P50).
Turbo grill default temperature 200°C (Temperature range 50-220°C).
Press
°C/W/g
once to enter the Microwave power mode, and then again to
enter the Turbo conventional temperature mode. These can both then be
adjusted using the / keys followed by
SELECT
to confirm.
The default time is 1.00hr. To Adjust the time, press the button followed by
the / and
SELECT
to confirm.
Finally press to start the programme.
Microwave
– Default power P100 (power range P10-P100).
To adjust the power, press / until the correct power is reached followed by
SELECT
.
Default time is 1 minute. To Adjust the time, press the button followed by
the / and
SELECT
to confirm.
Finally press to start the programme.
Defrost -
Default weight 1000g (weight range 100-2000g).
To adjust the weight press the
°C/W/g
button followed by the / and
SELECT
to confirm.
Finally press to start the programme. The default time will be adjusted
according to the set weight (See the 'Defrost time table' for more info).
Fan heat -
Default temperature 200°C
To adjust the temperature press
°C/W/g
followed by / . Press
SELECT
to
confirm.
The default time is 1.00hr. To Adjust the time, press the button followed by
the / and
SELECT
to confirm.
Finally press to start the programme.
Turbo conventional
- Default temperature 200°C (Temperature range 50-220°C).
To adjust the temperature press
°C/W/g
followed by / . Press
SELECT
to
confirm.
The default time is 1.00hr. To Adjust the time, press the button followed by
the / and
SELECT
to confirm.
Finally press to start the programme.
D E F R O S T:
Default weight 1000g (weight range 100-2000g).
To adjust the weight press the °C/W/g button followed by the
Time setting
Time zone can show “Time, Duration time, End of cooking time and Alarm” in this sequence:
All time settings can be operated by pressing
/
,
SELECT
,
and
Alarm setting
To set the Alarm/minute minder, press the button until the symbol starts to flash. Use /
to adjust the time, and then press
SELECT
to confirm. If you want to cancel the alarm, set the alarm
time back to '0.00' and press
SELECT
to confirm.
When the time is up, the alarm will sound for 90 seconds, and the symbol will begin to flash. To
stop the alarm, press either , , or
SELECT.
Setting the time
To set the time, turn the oven on, and then press and hold the button for 3 seconds until the
time begins to flash. Adjust the time using the / and then press SELECT to confirm.
when the oven is first turned on or restarts, the time must be set before using the oven.
Duration cooking(0-10hrs)
Once a function and temperature have been selected, press the button and the Duration time
will start to flash. press / to adjust the time, and then SELECT to confirm. Once the time is
up, the alarm will sound and the oven will switch off.
Press any of the buttons to turn off the alarm
To cancel Duration cooking set the cooking time to '0:00' and confirm.
/
,
SELECT
,
and
End cooking time
Once the Duration cooking time has been set, press twice and the End cooking time should
start to flash. Adjust the time to the time you wish cooking to stop and press SELECT to confirm.
Your oven will then work out when to turn on, so that it cooks for the required duration time, and
finishes at the required end time. E.g. Duration time set at 30 minutes, and the end time set to
18.15, the oven will automatically turn on at 17.45 and cook for 30 minutes on the set function and
temperature (start time = End time - duration time).
Child lock
Press and hold SELECT for 5 seconds to set the child lock. The symbol will appear in the display
once activated.
To cancel the Child lock, press and hold SELECT again for 5 seconds. The symbol will disappear
from the display once deactivated.
and
SELECT
to confirm.
Finally press
Turbo grill
- Default temperature 200°C (Temperature range 50-220°C).
To adjust the temperature press
°C/W/g
followed by / . Press
SELECT
to confirm.
The default time is 1.00hr. To Adjust the time, press the button followed by
the / and
SELECT
to confirm.
Finally press to start the programme.
Microwave & Fan heat
Microwave default power P50 (Power range P10-P50).
Fan heat default temperature 200°C (Temperature range 50-220°C).
Press
°C/W/g
once to enter the Microwave power mode, and then again to
enter the fan heat temperature mode. These can both then be adjusted using the
/ keys followed by
SELECT
to confirm.
The default time is 1.00hr. To Adjust the time, press the button followed
by the / and
SELECT
to confirm.
Finally press to start the programme.
MICROWAVE OVEN FUNCTIONS
Press PROG to select the following function
s:
Symbol
Descri
ption
Display
Microwave & Turbo grill
Microwave default power P50 (Power range P10-P50).
Turbo grill default temperature 200°C (Temperature range 50-220°C).
Press
°C/W/g
once to enter the Microwave power mode, and then again to
enter the Turbo grill temperature mode. These can both then be adjusted using
the / keys followed by
SELECT
to confirm.
The default time is 1.00hr. To Adjust the time, press the button followed
by the / and
SELECT
to confirm.
Finally press to start the programme.
Microwave & Turbo conventional heat
Microwave default power P50 (Power range P10-P50).
Turbo grill default temperature 200°C (Temperature range 50-220°C).
Press
°C/W/g
once to enter the Microwave power mode, and then again to
enter the Turbo conventional temperature mode. These can both then be
adjusted using the / keys followed by
SELECT
to confirm.
The default time is 1.00hr. To Adjust the time, press the button followed by
the / and
SELECT
to confirm.
Finally press to start the programme.
Microwave
– Default power P100 (power range P10-P100).
To adjust the power, press / until the correct power is reached followed by
SELECT
.
Default time is 1 minute. To Adjust the time, press the button followed by
the / and
SELECT
to confirm.
Finally press to start the programme.
Defrost -
Default weight 1000g (weight range 100-2000g).
To adjust the weight press the
°C/W/g
button followed by the / and
SELECT
to confirm.
Finally press to start the programme. The default time will be adjusted
according to the set weight (See the 'Defrost time table' for more info).
Fan heat -
Default temperature 200°C
To adjust the temperature press
°C/W/g
followed by / . Press
SELECT
to
confirm.
The default time is 1.00hr. To Adjust the time, press the button followed by
the / and
SELECT
to confirm.
Finally press to start the programme.
Turbo conventional
- Default temperature 200°C (Temperature range 50-220°C).
To adjust the temperature press
°C/W/g
followed by / . Press
SELECT
to
confirm.
The default time is 1.00hr. To Adjust the time, press the button followed by
the / and
SELECT
to confirm.
Finally press to start the programme.
to start the programme. The default time will be adjusted
according to the set weight (See the ‘Defrost time table’ for more info).
Turbo grill
- Default temperature 200°C (Temperature range 50-220°C).
To adjust the temperature press
°C/W/g
followed by / . Press
SELECT
to confirm.
The default time is 1.00hr. To Adjust the time, press the button followed by
the / and
SELECT
to confirm.
Finally press to start the programme.
Microwave & Fan heat
Microwave default power P50 (Power range P10-P50).
Fan heat default temperature 200°C (Temperature range 50-220°C).
Press
°C/W/g
once to enter the Microwave power mode, and then again to
enter the fan heat temperature mode. These can both then be adjusted using the
/ keys followed by
SELECT
to confirm.
The default time is 1.00hr. To Adjust the time, press the button followed
by the / and
SELECT
to confirm.
Finally press to start the programme.
MICROWAVE OVEN FUNCTIONS
Press PROG to select the following function
s:
Symbol
Descri
ption
Display
Microwave & Turbo grill
Microwave default power P50 (Power range P10-P50).
Turbo grill default temperature 200°C (Temperature range 50-220°C).
Press
°C/W/g
once to enter the Microwave power mode, and then again to
enter the Turbo grill temperature mode. These can both then be adjusted using
the / keys followed by
SELECT
to confirm.
The default time is 1.00hr. To Adjust the time, press the button followed
by the / and
SELECT
to confirm.
Finally press to start the programme.
Microwave & Turbo conventional heat
Microwave default power P50 (Power range P10-P50).
Turbo grill default temperature 200°C (Temperature range 50-220°C).
Press
°C/W/g
once to enter the Microwave power mode, and then again to
enter the Turbo conventional temperature mode. These can both then be
adjusted using the / keys followed by
SELECT
to confirm.
The default time is 1.00hr. To Adjust the time, press the button followed by
the / and
SELECT
to confirm.
Finally press to start the programme.
Microwave
– Default power P100 (power range P10-P100).
To adjust the power, press / until the correct power is reached followed by
SELECT
.
Default time is 1 minute. To Adjust the time, press the button followed by
the / and
SELECT
to confirm.
Finally press to start the programme.
Defrost -
Default weight 1000g (weight range 100-2000g).
To adjust the weight press the
°C/W/g
button followed by the / and
SELECT
to confirm.
Finally press to start the programme. The default time will be adjusted
according to the set weight (See the 'Defrost time table' for more info).
Fan heat -
Default temperature 200°C
To adjust the temperature press
°C/W/g
followed by / . Press
SELECT
to
confirm.
The default time is 1.00hr. To Adjust the time, press the button followed by
the / and
SELECT
to confirm.
Finally press to start the programme.
Turbo conventional
- Default temperature 200°C (Temperature range 50-220°C).
To adjust the temperature press
°C/W/g
followed by / . Press
SELECT
to
confirm.
The default time is 1.00hr. To Adjust the time, press the button followed by
the / and
SELECT
to confirm.
Finally press to start the programme.
FA N H E AT:
Default temperature 200°C.
To adjust the temperature press
°C/W/g
followed by
Time setting
Time zone can show “Time, Duration time, End of cooking time and Alarm” in this sequence:
All time settings can be operated by pressing
/
,
SELECT
,
and
Alarm setting
To set the Alarm/minute minder, press the button until the symbol starts to flash. Use /
to adjust the time, and then press
SELECT
to confirm. If you want to cancel the alarm, set the alarm
time back to '0.00' and press
SELECT
to confirm.
When the time is up, the alarm will sound for 90 seconds, and the symbol will begin to flash. To
stop the alarm, press either , , or
SELECT.
Setting the time
To set the time, turn the oven on, and then press and hold the button for 3 seconds until the
time begins to flash. Adjust the time using the / and then press SELECT to confirm.
when the oven is first turned on or restarts, the time must be set before using the oven.
Duration cooking(0-10hrs)
Once a function and temperature have been selected, press the button and the Duration time
will start to flash. press / to adjust the time, and then SELECT to confirm. Once the time is
up, the alarm will sound and the oven will switch off.
Press any of the buttons to turn off the alarm
To cancel Duration cooking set the cooking time to '0:00' and confirm.
/
,
SELECT
,
and
End cooking time
Once the Duration cooking time has been set, press twice and the End cooking time should
start to flash. Adjust the time to the time you wish cooking to stop and press SELECT to confirm.
Your oven will then work out when to turn on, so that it cooks for the required duration time, and
finishes at the required end time. E.g. Duration time set at 30 minutes, and the end time set to
18.15, the oven will automatically turn on at 17.45 and cook for 30 minutes on the set function and
temperature (start time = End time - duration time).
Child lock
Press and hold SELECT for 5 seconds to set the child lock. The symbol will appear in the display
once activated.
To cancel the Child lock, press and hold SELECT again for 5 seconds. The symbol will disappear
from the display once deactivated.
.
Press
SELECT
to confirm.
The default time is 1.00hr. To Adjust the time, press the
Alarm setting
To set the Alarm/minute minder, press the button until the symbol starts to flash. Use /
to adjust the time, and then press
SELECT
to confirm. If you want to cancel the alarm, set the alarm
time back to '0.00' and press
SELECT
to confirm.
When the time is up, the alarm will sound for 90 seconds, and the symbol will begin to flash. To
stop the alarm, press any button.
Setting the time
To set the time, turn the oven on, and then press and hold the button for 3 seconds until the
time begins to flash. Adjust the time using the / and then press SELECT to confirm.
when the oven is first turned on or restarts, the time must be set before using the oven.
Duration cooking(0-10hrs)
Once a function and temperature have been selected, press the button and the Duration time
will start to flash. press / to adjust the time, and then SELECT to confirm. Once the time is
up, the alarm will sound and the oven will switch off.
Press any of the buttons to turn off the alarm
/
,
SELECT
,
and
To cancel Duration cooking set the cooking time to '0:00' and confirm.
End cooking time
Once the Duration cooking time has been set, press twice and the End cooking time should
start to flash. Adjust the time to the time you wish cooking to stop and press SELECT to confirm.
Your oven will then work out when to turn on, so that it cooks for the required duration time, and
finishes at the required end time. E.g. Duration time set at 30 minutes, and the end time set to
18.15, the oven will automatically turn on at 17.45 and cook for 30 minutes on the set function and
temperature (start time = End time - duration time).
button
followed by the
Time setting
Time zone can show “Time, Duration time, End of cooking time and Alarm” in this sequence:
All time settings can be operated by pressing
/
,
SELECT
,
and
Alarm setting
To set the Alarm/minute minder, press the button until the symbol starts to flash. Use /
to adjust the time, and then press
SELECT
to confirm. If you want to cancel the alarm, set the alarm
time back to '0.00' and press
SELECT
to confirm.
When the time is up, the alarm will sound for 90 seconds, and the symbol will begin to flash. To
stop the alarm, press either , , or
SELECT.
Setting the time
To set the time, turn the oven on, and then press and hold the button for 3 seconds until the
time begins to flash. Adjust the time using the / and then press SELECT to confirm.
when the oven is first turned on or restarts, the time must be set before using the oven.
Duration cooking(0-10hrs)
Once a function and temperature have been selected, press the button and the Duration time
will start to flash. press / to adjust the time, and then SELECT to confirm. Once the time is
up, the alarm will sound and the oven will switch off.
Press any of the buttons to turn off the alarm
To cancel Duration cooking set the cooking time to '0:00' and confirm.
/
,
SELECT
,
and
End cooking time
Once the Duration cooking time has been set, press twice and the End cooking time should
start to flash. Adjust the time to the time you wish cooking to stop and press SELECT to confirm.
Your oven will then work out when to turn on, so that it cooks for the required duration time, and
finishes at the required end time. E.g. Duration time set at 30 minutes, and the end time set to
18.15, the oven will automatically turn on at 17.45 and cook for 30 minutes on the set function and
temperature (start time = End time - duration time).
Child lock
Press and hold SELECT for 5 seconds to set the child lock. The symbol will appear in the display
once activated.
To cancel the Child lock, press and hold SELECT again for 5 seconds. The symbol will disappear
from the display once deactivated.
and
SELECT
to confirm.
Finally press
Turbo grill
- Default temperature 200°C (Temperature range 50-220°C).
To adjust the temperature press
°C/W/g
followed by / . Press
SELECT
to confirm.
The default time is 1.00hr. To Adjust the time, press the button followed by
the / and
SELECT
to confirm.
Finally press to start the programme.
Microwave & Fan heat
Microwave default power P50 (Power range P10-P50).
Fan heat default temperature 200°C (Temperature range 50-220°C).
Press
°C/W/g
once to enter the Microwave power mode, and then again to
enter the fan heat temperature mode. These can both then be adjusted using the
/ keys followed by
SELECT
to confirm.
The default time is 1.00hr. To Adjust the time, press the button followed
by the / and
SELECT
to confirm.
Finally press to start the programme.
MICROWAVE OVEN FUNCTIONS
Press PROG to select the following function
s:
Symbol
Descri
ption
Display
Microwave & Turbo grill
Microwave default power P50 (Power range P10-P50).
Turbo grill default temperature 200°C (Temperature range 50-220°C).
Press
°C/W/g
once to enter the Microwave power mode, and then again to
enter the Turbo grill temperature mode. These can both then be adjusted using
the / keys followed by
SELECT
to confirm.
The default time is 1.00hr. To Adjust the time, press the button followed
by the / and
SELECT
to confirm.
Finally press to start the programme.
Microwave & Turbo conventional heat
Microwave default power P50 (Power range P10-P50).
Turbo grill default temperature 200°C (Temperature range 50-220°C).
Press
°C/W/g
once to enter the Microwave power mode, and then again to
enter the Turbo conventional temperature mode. These can both then be
adjusted using the / keys followed by
SELECT
to confirm.
The default time is 1.00hr. To Adjust the time, press the button followed by
the / and
SELECT
to confirm.
Finally press to start the programme.
Microwave
– Default power P100 (power range P10-P100).
To adjust the power, press / until the correct power is reached followed by
SELECT
.
Default time is 1 minute. To Adjust the time, press the button followed by
the / and
SELECT
to confirm.
Finally press to start the programme.
Defrost -
Default weight 1000g (weight range 100-2000g).
To adjust the weight press the
°C/W/g
button followed by the / and
SELECT
to confirm.
Finally press to start the programme. The default time will be adjusted
according to the set weight (See the 'Defrost time table' for more info).
Fan heat -
Default temperature 200°C
To adjust the temperature press
°C/W/g
followed by / . Press
SELECT
to
confirm.
The default time is 1.00hr. To Adjust the time, press the button followed by
the / and
SELECT
to confirm.
Finally press to start the programme.
Turbo conventional
- Default temperature 200°C (Temperature range 50-220°C).
To adjust the temperature press
°C/W/g
followed by / . Press
SELECT
to
confirm.
The default time is 1.00hr. To Adjust the time, press the button followed by
the / and
SELECT
to confirm.
Finally press to start the programme.
to start the programme.
Turbo grill
- Default temperature 200°C (Temperature range 50-220°C).
To adjust the temperature press
°C/W/g
followed by / . Press
SELECT
to confirm.
The default time is 1.00hr. To Adjust the time, press the button followed by
the / and
SELECT
to confirm.
Finally press to start the programme.
Microwave & Fan heat
Microwave default power P50 (Power range P10-P50).
Fan heat default temperature 200°C (Temperature range 50-220°C).
Press
°C/W/g
once to enter the Microwave power mode, and then again to
enter the fan heat temperature mode. These can both then be adjusted using the
/ keys followed by
SELECT
to confirm.
The default time is 1.00hr. To Adjust the time, press the button followed
by the / and
SELECT
to confirm.
Finally press to start the programme.
MICROWAVE OVEN FUNCTIONS
Press PROG to select the following function
s:
Symbol
Descri
ption
Display
Microwave & Turbo grill
Microwave default power P50 (Power range P10-P50).
Turbo grill default temperature 200°C (Temperature range 50-220°C).
Press
°C/W/g
once to enter the Microwave power mode, and then again to
enter the Turbo grill temperature mode. These can both then be adjusted using
the / keys followed by
SELECT
to confirm.
The default time is 1.00hr. To Adjust the time, press the button followed
by the / and
SELECT
to confirm.
Finally press to start the programme.
Microwave & Turbo conventional heat
Microwave default power P50 (Power range P10-P50).
Turbo grill default temperature 200°C (Temperature range 50-220°C).
Press
°C/W/g
once to enter the Microwave power mode, and then again to
enter the Turbo conventional temperature mode. These can both then be
adjusted using the / keys followed by
SELECT
to confirm.
The default time is 1.00hr. To Adjust the time, press the button followed by
the / and
SELECT
to confirm.
Finally press to start the programme.
Microwave
– Default power P100 (power range P10-P100).
To adjust the power, press / until the correct power is reached followed by
SELECT
.
Default time is 1 minute. To Adjust the time, press the button followed by
the / and
SELECT
to confirm.
Finally press to start the programme.
Defrost -
Default weight 1000g (weight range 100-2000g).
To adjust the weight press the
°C/W/g
button followed by the / and
SELECT
to confirm.
Finally press to start the programme. The default time will be adjusted
according to the set weight (See the 'Defrost time table' for more info).
Fan heat -
Default temperature 200°C
To adjust the temperature press
°C/W/g
followed by / . Press
SELECT
to
confirm.
The default time is 1.00hr. To Adjust the time, press the button followed by
the / and
SELECT
to confirm.
Finally press to start the programme.
Turbo conventional
- Default temperature 200°C (Temperature range 50-220°C).
To adjust the temperature press
°C/W/g
followed by / . Press
SELECT
to
confirm.
The default time is 1.00hr. To Adjust the time, press the button followed by
the / and
SELECT
to confirm.
Finally press to start the programme.
Turbo grill
- Default temperature 200°C (Temperature range 50-220°C).
To adjust the temperature press
°C/W/g
followed by / . Press
SELECT
to confirm.
The default time is 1.00hr. To Adjust the time, press the button followed by
the / and
SELECT
to confirm.
Finally press to start the programme.
Microwave & Fan heat
Microwave default power P50 (Power range P10-P50).
Fan heat default temperature 200°C (Temperature range 50-220°C).
Press
°C/W/g
once to enter the Microwave power mode, and then again to
enter the fan heat temperature mode. These can both then be adjusted using the
/ keys followed by
SELECT
to confirm.
The default time is 1.00hr. To Adjust the time, press the button followed
by the / and
SELECT
to confirm.
Finally press to start the programme.
MICROWAVE OVEN FUNCTIONS
Press PROG to select the following function
s:
Symbol
Descri
ption
Display
Microwave & Turbo grill
Microwave default power P50 (Power range P10-P50).
Turbo grill default temperature 200°C (Temperature range 50-220°C).
Press
°C/W/g
once to enter the Microwave power mode, and then again to
enter the Turbo grill temperature mode. These can both then be adjusted using
the / keys followed by
SELECT
to confirm.
The default time is 1.00hr. To Adjust the time, press the button followed
by the / and
SELECT
to confirm.
Finally press to start the programme.
Microwave & Turbo conventional heat
Microwave default power P50 (Power range P10-P50).
Turbo grill default temperature 200°C (Temperature range 50-220°C).
Press
°C/W/g
once to enter the Microwave power mode, and then again to
enter the Turbo conventional temperature mode. These can both then be
adjusted using the / keys followed by
SELECT
to confirm.
The default time is 1.00hr. To Adjust the time, press the button followed by
the / and
SELECT
to confirm.
Finally press to start the programme.
Microwave
– Default power P100 (power range P10-P100).
To adjust the power, press / until the correct power is reached followed by
SELECT
.
Default time is 1 minute. To Adjust the time, press the button followed by
the / and
SELECT
to confirm.
Finally press to start the programme.
Defrost -
Default weight 1000g (weight range 100-2000g).
To adjust the weight press the
°C/W/g
button followed by the / and
SELECT
to confirm.
Finally press to start the programme. The default time will be adjusted
according to the set weight (See the 'Defrost time table' for more info).
Fan heat -
Default temperature 200°C
To adjust the temperature press
°C/W/g
followed by / . Press
SELECT
to
confirm.
The default time is 1.00hr. To Adjust the time, press the button followed by
the / and
SELECT
to confirm.
Finally press to start the programme.
Turbo conventional
- Default temperature 200°C (Temperature range 50-220°C).
To adjust the temperature press
°C/W/g
followed by / . Press
SELECT
to
confirm.
The default time is 1.00hr. To Adjust the time, press the button followed by
the / and
SELECT
to confirm.
Finally press to start the programme.
T U R B O G R I L L :
Default temperature 200°C (Temperature range 50-220°C).
To adjust the temperature press
°C/W/g
followed by
Time setting
Time zone can show “Time, Duration time, End of cooking time and Alarm” in this sequence:
All time settings can be operated by pressing
/
,
SELECT
,
and
Alarm setting
To set the Alarm/minute minder, press the button until the symbol starts to flash. Use /
to adjust the time, and then press
SELECT
to confirm. If you want to cancel the alarm, set the alarm
time back to '0.00' and press
SELECT
to confirm.
When the time is up, the alarm will sound for 90 seconds, and the symbol will begin to flash. To
stop the alarm, press either , , or
SELECT.
Setting the time
To set the time, turn the oven on, and then press and hold the button for 3 seconds until the
time begins to flash. Adjust the time using the / and then press SELECT to confirm.
when the oven is first turned on or restarts, the time must be set before using the oven.
Duration cooking(0-10hrs)
Once a function and temperature have been selected, press the button and the Duration time
will start to flash. press / to adjust the time, and then SELECT to confirm. Once the time is
up, the alarm will sound and the oven will switch off.
Press any of the buttons to turn off the alarm
To cancel Duration cooking set the cooking time to '0:00' and confirm.
/
,
SELECT
,
and
End cooking time
Once the Duration cooking time has been set, press twice and the End cooking time should
start to flash. Adjust the time to the time you wish cooking to stop and press SELECT to confirm.
Your oven will then work out when to turn on, so that it cooks for the required duration time, and
finishes at the required end time. E.g. Duration time set at 30 minutes, and the end time set to
18.15, the oven will automatically turn on at 17.45 and cook for 30 minutes on the set function and
temperature (start time = End time - duration time).
Child lock
Press and hold SELECT for 5 seconds to set the child lock. The symbol will appear in the display
once activated.
To cancel the Child lock, press and hold SELECT again for 5 seconds. The symbol will disappear
from the display once deactivated.
.
Press
SELECT
to confirm.
The default time is 1.00hr. To Adjust the time, press the
Alarm setting
To set the Alarm/minute minder, press the button until the symbol starts to flash. Use /
to adjust the time, and then press
SELECT
to confirm. If you want to cancel the alarm, set the alarm
time back to '0.00' and press
SELECT
to confirm.
When the time is up, the alarm will sound for 90 seconds, and the symbol will begin to flash. To
stop the alarm, press any button.
Setting the time
To set the time, turn the oven on, and then press and hold the button for 3 seconds until the
time begins to flash. Adjust the time using the / and then press SELECT to confirm.
when the oven is first turned on or restarts, the time must be set before using the oven.
Duration cooking(0-10hrs)
Once a function and temperature have been selected, press the button and the Duration time
will start to flash. press / to adjust the time, and then SELECT to confirm. Once the time is
up, the alarm will sound and the oven will switch off.
Press any of the buttons to turn off the alarm
/
,
SELECT
,
and
To cancel Duration cooking set the cooking time to '0:00' and confirm.
End cooking time
Once the Duration cooking time has been set, press twice and the End cooking time should
start to flash. Adjust the time to the time you wish cooking to stop and press SELECT to confirm.
Your oven will then work out when to turn on, so that it cooks for the required duration time, and
finishes at the required end time. E.g. Duration time set at 30 minutes, and the end time set to
18.15, the oven will automatically turn on at 17.45 and cook for 30 minutes on the set function and
temperature (start time = End time - duration time).
button
followed by the
Time setting
Time zone can show “Time, Duration time, End of cooking time and Alarm” in this sequence:
All time settings can be operated by pressing
/
,
SELECT
,
and
Alarm setting
To set the Alarm/minute minder, press the button until the symbol starts to flash. Use /
to adjust the time, and then press
SELECT
to confirm. If you want to cancel the alarm, set the alarm
time back to '0.00' and press
SELECT
to confirm.
When the time is up, the alarm will sound for 90 seconds, and the symbol will begin to flash. To
stop the alarm, press either , , or
SELECT.
Setting the time
To set the time, turn the oven on, and then press and hold the button for 3 seconds until the
time begins to flash. Adjust the time using the / and then press SELECT to confirm.
when the oven is first turned on or restarts, the time must be set before using the oven.
Duration cooking(0-10hrs)
Once a function and temperature have been selected, press the button and the Duration time
will start to flash. press / to adjust the time, and then SELECT to confirm. Once the time is
up, the alarm will sound and the oven will switch off.
Press any of the buttons to turn off the alarm
To cancel Duration cooking set the cooking time to '0:00' and confirm.
/
,
SELECT
,
and
End cooking time
Once the Duration cooking time has been set, press twice and the End cooking time should
start to flash. Adjust the time to the time you wish cooking to stop and press SELECT to confirm.
Your oven will then work out when to turn on, so that it cooks for the required duration time, and
finishes at the required end time. E.g. Duration time set at 30 minutes, and the end time set to
18.15, the oven will automatically turn on at 17.45 and cook for 30 minutes on the set function and
temperature (start time = End time - duration time).
Child lock
Press and hold SELECT for 5 seconds to set the child lock. The symbol will appear in the display
once activated.
To cancel the Child lock, press and hold SELECT again for 5 seconds. The symbol will disappear
from the display once deactivated.
and
SELECT
to confirm.
Finally press
Turbo grill
- Default temperature 200°C (Temperature range 50-220°C).
To adjust the temperature press
°C/W/g
followed by / . Press
SELECT
to confirm.
The default time is 1.00hr. To Adjust the time, press the button followed by
the / and
SELECT
to confirm.
Finally press to start the programme.
Microwave & Fan heat
Microwave default power P50 (Power range P10-P50).
Fan heat default temperature 200°C (Temperature range 50-220°C).
Press
°C/W/g
once to enter the Microwave power mode, and then again to
enter the fan heat temperature mode. These can both then be adjusted using the
/ keys followed by
SELECT
to confirm.
The default time is 1.00hr. To Adjust the time, press the button followed
by the / and
SELECT
to confirm.
Finally press to start the programme.
MICROWAVE OVEN FUNCTIONS
Press PROG to select the following function
s:
Symbol
Descri
ption
Display
Microwave & Turbo grill
Microwave default power P50 (Power range P10-P50).
Turbo grill default temperature 200°C (Temperature range 50-220°C).
Press
°C/W/g
once to enter the Microwave power mode, and then again to
enter the Turbo grill temperature mode. These can both then be adjusted using
the / keys followed by
SELECT
to confirm.
The default time is 1.00hr. To Adjust the time, press the button followed
by the / and
SELECT
to confirm.
Finally press to start the programme.
Microwave & Turbo conventional heat
Microwave default power P50 (Power range P10-P50).
Turbo grill default temperature 200°C (Temperature range 50-220°C).
Press
°C/W/g
once to enter the Microwave power mode, and then again to
enter the Turbo conventional temperature mode. These can both then be
adjusted using the / keys followed by
SELECT
to confirm.
The default time is 1.00hr. To Adjust the time, press the button followed by
the / and
SELECT
to confirm.
Finally press to start the programme.
Microwave
– Default power P100 (power range P10-P100).
To adjust the power, press / until the correct power is reached followed by
SELECT
.
Default time is 1 minute. To Adjust the time, press the button followed by
the / and
SELECT
to confirm.
Finally press to start the programme.
Defrost -
Default weight 1000g (weight range 100-2000g).
To adjust the weight press the
°C/W/g
button followed by the / and
SELECT
to confirm.
Finally press to start the programme. The default time will be adjusted
according to the set weight (See the 'Defrost time table' for more info).
Fan heat -
Default temperature 200°C
To adjust the temperature press
°C/W/g
followed by / . Press
SELECT
to
confirm.
The default time is 1.00hr. To Adjust the time, press the button followed by
the / and
SELECT
to confirm.
Finally press to start the programme.
Turbo conventional
- Default temperature 200°C (Temperature range 50-220°C).
To adjust the temperature press
°C/W/g
followed by / . Press
SELECT
to
confirm.
The default time is 1.00hr. To Adjust the time, press the button followed by
the / and
SELECT
to confirm.
Finally press to start the programme.
to start the programme.
Turbo grill
- Default temperature 200°C (Temperature range 50-220°C).
To adjust the temperature press
°C/W/g
followed by / . Press
SELECT
to confirm.
The default time is 1.00hr. To Adjust the time, press the button followed by
the / and
SELECT
to confirm.
Finally press to start the programme.
Microwave & Fan heat
Microwave default power P50 (Power range P10-P50).
Fan heat default temperature 200°C (Temperature range 50-220°C).
Press
°C/W/g
once to enter the Microwave power mode, and then again to
enter the fan heat temperature mode. These can both then be adjusted using the
/ keys followed by
SELECT
to confirm.
The default time is 1.00hr. To Adjust the time, press the button followed
by the / and
SELECT
to confirm.
Finally press to start the programme.
MICROWAVE OVEN FUNCTIONS
Press PROG to select the following function
s:
Symbol
Descri
ption
Display
Microwave & Turbo grill
Microwave default power P50 (Power range P10-P50).
Turbo grill default temperature 200°C (Temperature range 50-220°C).
Press
°C/W/g
once to enter the Microwave power mode, and then again to
enter the Turbo grill temperature mode. These can both then be adjusted using
the / keys followed by
SELECT
to confirm.
The default time is 1.00hr. To Adjust the time, press the button followed
by the / and
SELECT
to confirm.
Finally press to start the programme.
Microwave & Turbo conventional heat
Microwave default power P50 (Power range P10-P50).
Turbo grill default temperature 200°C (Temperature range 50-220°C).
Press
°C/W/g
once to enter the Microwave power mode, and then again to
enter the Turbo conventional temperature mode. These can both then be
adjusted using the / keys followed by
SELECT
to confirm.
The default time is 1.00hr. To Adjust the time, press the button followed by
the / and
SELECT
to confirm.
Finally press to start the programme.
Microwave
– Default power P100 (power range P10-P100).
To adjust the power, press / until the correct power is reached followed by
SELECT
.
Default time is 1 minute. To Adjust the time, press the button followed by
the / and
SELECT
to confirm.
Finally press to start the programme.
Defrost -
Default weight 1000g (weight range 100-2000g).
To adjust the weight press the
°C/W/g
button followed by the / and
SELECT
to confirm.
Finally press to start the programme. The default time will be adjusted
according to the set weight (See the 'Defrost time table' for more info).
Fan heat -
Default temperature 200°C
To adjust the temperature press
°C/W/g
followed by / . Press
SELECT
to
confirm.
The default time is 1.00hr. To Adjust the time, press the button followed by
the / and
SELECT
to confirm.
Finally press to start the programme.
Turbo conventional
- Default temperature 200°C (Temperature range 50-220°C).
To adjust the temperature press
°C/W/g
followed by / . Press
SELECT
to
confirm.
The default time is 1.00hr. To Adjust the time, press the button followed by
the / and
SELECT
to confirm.
Finally press to start the programme.
Turbo grill
- Default temperature 200°C (Temperature range 50-220°C).
To adjust the temperature press
°C/W/g
followed by / . Press
SELECT
to confirm.
The default time is 1.00hr. To Adjust the time, press the button followed by
the / and
SELECT
to confirm.
Finally press to start the programme.
Microwave & Fan heat
Microwave default power P50 (Power range P10-P50).
Fan heat default temperature 200°C (Temperature range 50-220°C).
Press
°C/W/g
once to enter the Microwave power mode, and then again to
enter the fan heat temperature mode. These can both then be adjusted using the
/ keys followed by
SELECT
to confirm.
The default time is 1.00hr. To Adjust the time, press the button followed
by the / and
SELECT
to confirm.
Finally press to start the programme.
MICROWAVE OVEN FUNCTIONS
Press PROG to select the following function
s:
Symbol
Descri
ption
Display
Microwave & Turbo grill
Microwave default power P50 (Power range P10-P50).
Turbo grill default temperature 200°C (Temperature range 50-220°C).
Press
°C/W/g
once to enter the Microwave power mode, and then again to
enter the Turbo grill temperature mode. These can both then be adjusted using
the / keys followed by
SELECT
to confirm.
The default time is 1.00hr. To Adjust the time, press the button followed
by the / and
SELECT
to confirm.
Finally press to start the programme.
Microwave & Turbo conventional heat
Microwave default power P50 (Power range P10-P50).
Turbo grill default temperature 200°C (Temperature range 50-220°C).
Press
°C/W/g
once to enter the Microwave power mode, and then again to
enter the Turbo conventional temperature mode. These can both then be
adjusted using the / keys followed by
SELECT
to confirm.
The default time is 1.00hr. To Adjust the time, press the button followed by
the / and
SELECT
to confirm.
Finally press to start the programme.
Microwave
– Default power P100 (power range P10-P100).
To adjust the power, press / until the correct power is reached followed by
SELECT
.
Default time is 1 minute. To Adjust the time, press the button followed by
the / and
SELECT
to confirm.
Finally press to start the programme.
Defrost -
Default weight 1000g (weight range 100-2000g).
To adjust the weight press the
°C/W/g
button followed by the / and
SELECT
to confirm.
Finally press to start the programme. The default time will be adjusted
according to the set weight (See the 'Defrost time table' for more info).
Fan heat -
Default temperature 200°C
To adjust the temperature press
°C/W/g
followed by / . Press
SELECT
to
confirm.
The default time is 1.00hr. To Adjust the time, press the button followed by
the / and
SELECT
to confirm.
Finally press to start the programme.
Turbo conventional
- Default temperature 200°C (Temperature range 50-220°C).
To adjust the temperature press
°C/W/g
followed by / . Press
SELECT
to
confirm.
The default time is 1.00hr. To Adjust the time, press the button followed by
the / and
SELECT
to confirm.
Finally press to start the programme.
M I C R O W AV E O V E N F U N C T I O N S
Press the
PROG
button to select the following functions.