54
GB
When cooking is finished the display will flash “Program finished remove the dish” and, at
the same time, the oven will beep until you press a key or open the door.
Note: at any moment, if you make a mistake choosing the values and/or you want to change the settings of your recipe,
you can select
which cancels it and allows you start over from the beginning of the procedure.
Note: If you are cooking with the modified parameters of a pre-set recipe, while the oven beeps at the end of cooking,
you will see:
see how to save recipes in the next paragraph.
PERSONALISING RECIPES
Once a pre-set recipe has finished, if you decide that the parameters must be changed for the results that you want,
you can change the recipe you used and save it for the next time by storing the new parameters used (weight and
cooking time).
To change the parameters of a preset recipe, do the following:
- with the + key select “YES”
- confirm with the
key, the time used is displayed
- change with the + and - keys and confirm with
, the weight used appears
- change with the + and - keys and confirm with
, you will see the message “Recipe
saved POS. 1/1, and so on with a progressive number
Every time you access the “personal recipes” menu, you will fine your recipes saved in the
list of your recipes.
If there is not enough memory for saving personal recipes, the following message appears
on the display: “Insufficient memory, impossible to save”.
Before saving your recipe, you must delete one from
the menu in this way:
- select the
function;
- and then, by pressing
go to the “personal
recipes” section where you will find the saved
recipes;