Instruction manual CM108SS & CM108BK
12
Please keep this instruction manual for future reference
The rear panel of the cabinet must be removed so that air can circulate freely. The panel to which
the microwave oven is fitted should have a gap of at least 70mm at the rear for ventilation
(fig.4 & fig.5).
See below for full dimensional drawings of your microwave oven to help with installation.
For a built-in oven microwave to work well the cabinet must be of the right type.
The panels of the adjoining furniture should be heat resistant. Particularly when the adjoining
furniture is made of veneered wood, the adhesives should be able to withstand a temperature
of 120ºC. Plastic materials or adhesive which cannot withstand this temperature may become
deformed or unstuck.
To comply with safety regulations, once the appliance has been fitted it should not be possible to
make contact with the electrical parts.
All parts which offer protection should be fixed in such a way that they cannot be removed
without the use of a tool.
567mm
596mm
543mm
8mm
2.6mm
23mm
456mm
11
6m
m
25.5mm
25.5mm
M I C R O W AV E O V E N D I M E N S I O N S
540mm
565mm
5mm
555mm
20mm
578mm
540mm
20mm
20mm
540mm
565mm
5mm
578mm
20mm
467mm
593mm
116mm
595mm
5mm
555mm
20mm
540mm
467mm
593mm
116mm
595mm
5mm
20mm
Fig.4
Fig.5
