Instruction manual C994i 23
Please keep this instruction manual for future reference
A D J U S T I N G T H E B R AC K E T P O S I T I O N
Fix the hob on the work surface by screwing 4 brackets on the bottom of hob (see picture) after
installation. Adjust the bracket position to suit for different worktop thickness.
C AU T I O N S :
-
The hob should not be installed directly above a dishwasher, fridge, freezer, washing machine or
clothes dryer, as the humidity may damage the hob electronics.
-
The wall and induced heating zone above the table surface should be able to withstand heat.
-
To avoid any damage, the worktop sandwich layer and adhesive must be heat resistant.
C O N N E C T I N G T H E H O B TO T H E M A I N S P OW E R S U P P LY
WA R N I N G :
-
This hob must be connected to the mains power supply only by a suitably qualified person.
-
Before connecting the hob to the mains power supply, check that:
1. The domestic wiring system is suitable for the power drawn by the hob.
2. The voltage corresponds to the value given in the rating plate.
3. The power supply cable sections can withstand the load specified on the rating plate.
-
To connect the hob to the mains power supply, do not use adapters, reducers, or branching
devices, as they can cause overheating and fire.
-
The power supply cable must not touch any hot parts and must be positioned so that its
temperature will not exceed 75°C at any point.
