1-2 Installation :
Control the installation of the gasket under the glass.
If the glass is glued with silicone and in case of an after sales service: leave
the glass in place and dismount the steel case under the work plan.
Control the ventilation of the air coming in of the ventilator (minimum 20 mm
of space).
1-3 Quality of the pans :
Control if the pan is compatible with induction.
- either
a „magnet“ must remain hung on the bottom of the pan
- or put a little water that must quickly boil at the power level
„9”.
The functioning of an induction generates a certain sonority. This one
depends on the pans used.
Use only pans with flat bottoms. Others risk damaging the hob.
BAD
GOOD
1-4 Use :
To start the hob it is necessary to press the key [0/I] during 2 to 3 seconds.
During the first times of use, the cooking appliance will release an smell of
„new“.
1-5 Ventilation :
The ventilation starts as soon as two heating zones are switched on.
This ventilation goes on cooling the heating zones even after the stop of
cooking.
1-6 Securities :
In case of overflow, the hob stops as soon as 2 keys at least of the control
panel are covered.
Caple C901I Induction Hob
