A. Disconnect the hob from
the electrical network
.
B. Connect the network and take into account that the configuration setting has to be made in a
maximum time of 2 minutes
.
C.
Do not switch ON
the hob key
( 8 )
.
D. Press the “keep warm” key
( 1 )
and
keep the finger on this key
.
E. With another finger press at the same time. one after the other, following touches:
( 2 )
Key : front right
( 3 )
Key : rear right
( 4 )
Key : middle
( 5 )
Key : rear left
( 6 )
Key : front left
Every touch has to be pressed within
2 seconds
maximum.
A double “B
EEP
” indicates that the procedure failed (time exceeded in the selection of the keys,
wrong direction of selection…) In this case the procedure must be begun again to the stage, D
or A if necessary.
Release the finger from “keep warm” key
( 1 )
F. [ C ] and [ 0 ] blinks alternately on the rear left display
( 5 )
G. The configuration code displays on the front left display
( 6 )
H. Select the rear left display
( 5 )
I.
Choose the adapted configuration with the “SLIDER”
( 7 )
, slide to the left to decrease and to the
right to increase. Slide until [ C ] and [ 6 ] blink alternately.
J. Then select the front left display
( 6 )
; choose the right configuration with the slider :
0
corresponds to C 6/
0
– Demo mode is deactivated
1
corresponds to C 6/
1
– Demo mode is activated
K. Validate this choice by pushing the On / Off key [O/I]
( 8 )
(during 3s).
A long “B
EE
P” is perceptible and the segments will move upwards during a few seconds. The hob
is
now ready to be used.
DEMO
function
On/off key
(8)
Keep warm key
(1)
Power display / Rear
right (3)
Power selection zone
“SLIDER” and timer
setting zone (7)
Power display /
Rear left (5)
Power display / Front
right (2)
Power display / Front
left (6)
Power display /
Middle (4)
2
2
Содержание C901I
Страница 23: ...Notes ...
