Caple C897i Скачать руководство пользователя страница 22

Страница: 22 / 36

Instruction manual C897i

Please keep this instruction manual for future reference

SETTING THE TIMER TO TURN ONE COOKING ZONE OFF

Instruction manual C995i

Please keep this instruction manual for future reference

S E T T I N G T H E T I M E R TO T U R N O N E C O O K I N G Z O N E O F F

Touch the heating zone selection control that you want to set the timer for.

Touch the timer control,

“10” will show in the timer display

and the "0"

will flash.

Set the time by touching the

slider control (e.g.5).

Touch

the timer control again and the "1" will flash.

Set the time by touching the slider control (e.g.9). The timer will now be

set to 95 minutes.

When the time is set, it will begin to count down immediately. The display

will show the remaining time.

The red dot next to power level indicator will illuminate indicating that

zone is selected.

When cooking timer expires, the corresponding cooking zone will be

switched off automatically. The other cooking zone will keep operating if it

was turned on previously.

Touch the heating zone selection control that you want to set the timer for.

Instruction manual C995i

Please keep this instruction manual for future reference

S E T T I N G T H E T I M E R TO T U R N O N E C O O K I N G Z O N E O F F

Touch the heating zone selection control that you want to set the timer for.

Touch the timer control,

“10” will show in the timer display

and the "0"

will flash.

Set the time by touching the

slider control (e.g.5).

Touch

the timer control again and the "1" will flash.

Set the time by touching the slider control (e.g.9). The timer will now be

set to 95 minutes.

When the time is set, it will begin to count down immediately. The display

will show the remaining time.

The red dot next to power level indicator will illuminate indicating that

zone is selected.

When cooking timer expires, the corresponding cooking zone will be

switched off automatically. The other cooking zone will keep operating if it

was turned on previously.

Touch the timer control, “10” will show in the

timer display and the “0” will flash.

Instruction manual C995i

Please keep this instruction manual for future reference

S E T T I N G T H E T I M E R TO T U R N O N E C O O K I N G Z O N E O F F

Touch the heating zone selection control that you want to set the timer for.

Touch the timer control,

“10” will show in the timer display

and the "0"

will flash.

Set the time by touching the

slider control (e.g.5).

Touch

the timer control again and the "1" will flash.

Set the time by touching the slider control (e.g.9). The timer will now be

set to 95 minutes.

When the time is set, it will begin to count down immediately. The display

will show the remaining time.

The red dot next to power level indicator will illuminate indicating that

zone is selected.

When cooking timer expires, the corresponding cooking zone will be

switched off automatically. The other cooking zone will keep operating if it

was turned on previously.

Set the time by touching the slider control (e.g.5).

Instruction manual C995i

Please keep this instruction manual for future reference

S E T T I N G T H E T I M E R TO T U R N O N E C O O K I N G Z O N E O F F

Touch the heating zone selection control that you want to set the timer for.

Touch the timer control,

“10” will show in the timer display

and the "0"

will flash.

Set the time by touching the

slider control (e.g.5).

Touch

the timer control again and the "1" will flash.

Set the time by touching the slider control (e.g.9). The timer will now be

set to 95 minutes.

When the time is set, it will begin to count down immediately. The display

will show the remaining time.

The red dot next to power level indicator will illuminate indicating that

zone is selected.

When cooking timer expires, the corresponding cooking zone will be

switched off automatically. The other cooking zone will keep operating if it

was turned on previously.

Touch the timer control again and the “1” will flash.

Instruction manual C995i

Please keep this instruction manual for future reference

S E T T I N G T H E T I M E R TO T U R N O N E C O O K I N G Z O N E O F F

Touch the heating zone selection control that you want to set the timer for.

Touch the timer control,

“10” will show in the timer display

and the "0"

will flash.

Set the time by touching the

slider control (e.g.5).

Touch

the timer control again and the "1" will flash.

Set the time by touching the slider control (e.g.9). The timer will now be

set to 95 minutes.

When the time is set, it will begin to count down immediately. The display

will show the remaining time.

The red dot next to power level indicator will illuminate indicating that

zone is selected.

When cooking timer expires, the corresponding cooking zone will be

switched off automatically. The other cooking zone will keep operating if it

was turned on previously.

Set the time by touching the slider control (e.g.9).

The timer will now be set to 95 minutes.

Instruction manual C995i

Please keep this instruction manual for future reference

S E T T I N G T H E T I M E R TO T U R N O N E C O O K I N G Z O N E O F F

Touch the heating zone selection control that you want to set the timer for.

Touch the timer control,

“10” will show in the timer display

and the "0"

will flash.

Set the time by touching the

slider control (e.g.5).

Touch

the timer control again and the "1" will flash.

Set the time by touching the slider control (e.g.9). The timer will now be

set to 95 minutes.

When the time is set, it will begin to count down immediately. The display

will show the remaining time.

The red dot next to power level indicator will illuminate indicating that

zone is selected.

When cooking timer expires, the corresponding cooking zone will be

switched off automatically. The other cooking zone will keep operating if it

was turned on previously.

When the time is set, it will begin to count down immediately.

The display will show the remaining time.

The red dot next to power level indicator will

illuminate indicating that zone is selected.

Instruction manual C995i

Please keep this instruction manual for future reference

S E T T I N G T H E T I M E R TO T U R N O N E C O O K I N G Z O N E O F F

Touch the heating zone selection control that you want to set the timer for.

Touch the timer control,

“10” will show in the timer display

and the "0"

will flash.

Set the time by touching the

slider control (e.g.5).

Touch

the timer control again and the "1" will flash.

Set the time by touching the slider control (e.g.9). The timer will now be

set to 95 minutes.

When the time is set, it will begin to count down immediately. The display

will show the remaining time.

The red dot next to power level indicator will illuminate indicating that

zone is selected.

When cooking timer expires, the corresponding cooking zone will be

switched off automatically. The other cooking zone will keep operating if it

was turned on previously.

When cooking timer expires, the corresponding cooking zone

will be switched off automatically.

The other cooking zone will

keep operating if it was turned on previously.

Содержание C897i





































Результаты поиска

Содержание C897i

Отзывы:

Caple C897i, Инструкция по эксплуатации, Страница: 22 / 36

Результаты поиска

Содержание C897i

Отзывы: