Caple C896IBK, Инструкция по эксплуатации, Страница: 17 / 24

CLEANING
AND MAINTENANCE
Switch off the appliance before cleaning.
Do not clean the hob when the glass is too hot: risk of burns.
•
Remove small spots with a damp cloth using washing-up liquid diluted in a little water.
Then rinse with cold water and dry the surface thoroughly.
•
Grids, burner caps and burners can be removed to be cleaned.
•
Thermocouples and ignit
e
rs must
be
clean
ed
frequently in order to ensure correct operation.
•
Highly corrosive or abrasive detergents and cleaning equipment likely to cause scratches
must be avoided at all costs.
•
Never use steam driven or high-pressure cleaning equipment.
•
Do not use objects that might scratch the ceramic glass.
•
Ensure that the pan is dry and clean and that there is no dust on your ceramic hob or on
the pan. The use of rough saucepans will scratch the surface or the pan support.
•
Spillages of sugar, jam, jelly, etc. must be removed immediately to prevent damag
ing the
surface.
•
Do not use knives, scrapers or similar implements to clean the point where the glass
meets the burners.
•
Always dry the burner and pan supports completely. Water droplets or damp patches on
the hob at the start of cooking may damage the enamel.
TROUBLESHOOTING
The hob or th
e cooking zone doesn’t start-up:
•
The hob is badly connected
to
the electrical network.
•
The protection fuse cut-off.
•
The
locking
function is activated.
•
The sensitive keys are covered
with
grease or water.
•
An object is put on a key.
The control panel displays [ U ]:

There is no pan on the cooking zone.

The pan is not compatible with induction.

The bottom diameter of the pan is too small.
The control panel displays [ E ]:

Disconnect and replug the hob.

Call the After-sales Service.
One or all cooking zone cut-off:

The safety system functioned.

You forgot to cut-off the cooking zone for a long time.

One or more sensitive keys are covered.

The pan is empty and its bottom overheated.

The hob also has an automatic reduction of power level and breaking Automatic overheating
Continuous ventilation after cutting off the hob:

This is not a failure, the fan continuous to protect the electronic device.

The fan cooling stops automatically.
The automatic cooking
system doesn’t start-up:

The cooking zone is still hot [ H ].
The highest power level is set [ 9 ].