Caple C890i, Инструкция по эксплуатации

Страница: 11 / 16

2 2 / USING YOUR APPLIANCE EN
OFFSET PROGRAMMING
This allows you to adjust the finishing time
and the duration of this cooking session.
1. Switch on the hob of your choice, using the
button.
2. Press the button and it will display the
current time.If the time is correct, go to point
4, and if not, adjust the time.
3. ADJUSTING THE CURRENT TIME : Use
the “-”and “+”power level buttons in zone (B)
to change the hour and use the “-”and
“+”timer buttons (G) to adjust the minutes.
4. Validate the time by pressing the button
(the digits will then flash).
5. Adjust the time to when you wish cooking
to finish with the “ -”and“+” buttons from
zones (B) and (E).
6. Validate by pressing the button.
7. Adjust the cooking time using the “-”and
“+”timer buttons in zone (G).
8. Validate by pressing the button.
9. Define the chosen power level for cooking
with the“-”and “+”power level buttons from
zone (B).
10. Validate the power by pressing the but-
ton.
11. Once programmed, it displays (Auto) and
then the digits go off and only a red dot
remains lit.
IMPORTANT : Offset programming cannot be
used at the same time on more than one hob.
11
2. Once the hob has heated up, select the
chosen power level by pressing the “-”power
level button in zone “B”. The “BOOSTER”
function will be cancelled by pressing any
other power sensor associated with the hob,
or with the on/off sensor. • • SETTING THE TIMER
To use the timer:
- Switch on the cooking zone and adjust the
power level.
- Select the timer button of the cooking zone.
- Press
+
or
-
until you reach the desired set-
ting for your cooking time. For long durations,
press
-
to reach 99 minutes directly.
The timer starts counting only if the cooking
zone is covered with an item of cookware.
When the cooking is finished the zone switch-
es off, the timer indicates 0
0, and you are noti-
fied by a s so ou un nd d s siig gn na all.
- Press any button to stop the beeping.
To change the timer settings:
- Select your timer
- Press on
+
or
-
.
To stop the timer:
- Select your timer
- Press twice on
+
and
-
.