manualshive.com logo in svg

Caple C856i, Инструкция по эксплуатации, Страница: 34 / 36

Поделиться
Скачать
Caple C856i Скачать руководство пользователя страница 34

Instruction manual C856i

Please keep this instruction manual for future reference

34

Adjusting the bracket position

Fix the hob on the work surface by screwing 4 brackets on the bottom of hob (see 
picture) after installation. Adjust the bracket position to suit for different worktop 
thickness.

CAUTIONS

 

-  The induction hob must be installed by qualified personnel or Caple technicians.

Please never conduct the operation yourself.

 

-  The hob should not be installed directly above a dishwasher, fridge, freezer, 

washing machine or clothes dryer, as the humidity may damage the hob 
electronics.

 

-  The wall and induced heating zone above the table surface should be able to 

withstand heat.

 

-  To avoid any damage, the sandwich layer and adhesive must be resistant to heat.

Connecting the hob to the mains power supply

WARNING

 

-  This hob must be connected to the mains power supply only by a suitably 

qualified person.

 

- Before connecting the hob to the mains power supply, check that:
 

1. The domestic wiring system is suitable for the power drawn by the hob.

 

2. The voltage corresponds to the value given in the rating plate

 

3.  The power supply cable sections can withstand the load specified on the 

rating plate.

 

-  To connect the hob to the mains power supply, do not use adapters, reducers, or 

branching devices, as they can cause overheating and fire.

 

-  The power supply cable must not touch any hot parts and must be positioned so 

that its temperature will not exceed 75°C at any point.

Содержание C856i





































Отзывы:

Нет отзывов