16
HOW TO STOP THE PYROLYSIS CYCLE
1.
Turn the function selector to
0
(oven OFF)
-
If the oven cavity temperature is higher than 300°C
1a.
do•Lo
(door locked) appears steadily on the program-
mer display.
1b. When the oven cavity temperature drops below 300°C:
- the time appears on the programmer display again
- the key pilot light goes out
- the door unlocks
-
If the oven cavity temperature is lower than 300°C
1c. The time appears on the programmer display
1d. After a technical time:
- the key pilot light goes out
- the door unlocks
ACCIDENTAL INTERRUPTION OF THE PYROLYSIS
CYCLE
2.
The function selector has been turned to any cook-
ing function
-
If the oven cavity temperature is higher than 300°C
2a.
do•Lo
(door locked) appears steadily on the program-
mer display.
2b. When the oven cavity temperature drops below 300°C:
-
P0•00
appears with
P
flashing
- the key pilot light goes out
- the door unlocks
3c. To reset normal conditions turn the function selector to
0
(oven OFF). The time appears on the programmer
display.
-
If the oven cavity temperature is lower than 300°C
3d. The time appears on the programmer display, or the
oven cavity temperature (caution: in this case the heat-
ing elements are working).
3e. After a technical time:
- the key pilot light goes out
- - the door unlocks
3f. To reset normal conditions turn the function selector to
0
(oven OFF). The time appears on the programmer
display.
0
F
➀
0
F
I I I
I
I
I
II
I
I
I
I I I I
I
➁
2a
1a
1b
2b
3d
3d
