Caple C2238, Техническая информация

Страница: 14 / 48

Before putting on the knob ; be sure the knob segment and knob spring is set correctly
Mechanical component problems : Hinges & Knobs
Glass lid angle less than 90° / more
than 100°
CHANGE GLASS LID HINGE
IS THE LID HINGE COUNTERPART FIXED ?
FIX THE HINGE COUNTERPART.
IS IT STILL LESS 90° / MORE THAN 100° ?
NO
YES
YES
Glass lid hinge noisy
CHANGE THE METAL COOKTOP LID.
HINGE PROBLEMS
Oven door hinge noisy
KNOB PROBLEMS
REPLACE GASKET.
( KNOB GASKETS MUST BE SET PROPERLY
ON BOTH SIDES )
KNOB LOOSE
IF THE SPIRAL KNOB SPRING IS REMOVED,
ASSEMBLE A NEW KNOB RING.
KNOB GASKET GETTING OUT OF ITS
PLACE
TIGHTEN THE METAL LID HINGE BOTTOM PART,
DOES IT SOLVE?
NO
knob spring
knob segment
knob ring
IF NOT OKEY ;
CHANGE THE KNOB GASKET
Knob gaskets must be controlled on both
sides - to set properly.
IF KNOB SPRING IS AVAILABLE,
CHANGE THE KNOB.
CHANGE OVEN DOOR HINGE
Metal lid angle less than 90° / more than
100°