Instruction manual C2234 & C2234BK
10
11
Please keep this instruction manual for future reference
Please keep this instruction manual for future reference
Instruction manual C2234 & C2234BK
E N V I R O N M E N TA L P R OT E C T I O N
Waste electrical products should not be disposed of with household waste. Please recycle where
facilities exist. Check with your Local Authority or retailer for recycling advice. This appliance is
marked according to the European directive on Waste Electrical and Electronic Equipment (WEEE).
By ensuring this product is disposed of correctly, you will help prevent potential negative
consequences for the environment and human health, which could otherwise be caused by
inappropriate waste handling of this product. The symbol on the product indicates that this
product may not be treated as household waste. Instead it shall be handed over to the applicable
collection point for the recycling of electrical and electronic equipment. Disposal must be carried
out in accordance with local environmental regulations for waste disposal.
For more detailed information about treatment, recovery and recycling of this product, please
contact your local council, your household waste disposal service or the retailer where you
purchased the product.
WA R R A N T Y
Your new appliance is covered by warranty. The warranty card is enclosed - if it is missing, you
must provide the following information to your retailer in order to receive a replacement: date of
purchase, model and serial number. Registration can also be completed online by visiting
www.caple.co.uk.
Ensure you keep your warranty card safe, you may need to show it to Caple Service together with
proof of purchase.
If you fail to show your warranty card you will incur all repair charges.
Spare parts are only available from Caple Service and spare parts authorised centres.
C E D E C L A R AT I O N S O F C O N F O R M I T Y
This appliance has been manufactured to the strictest standards and complies with all applicable
legislation, Low Voltage Directive (LVD) and Electromagnetic Compatibility (EMC).
I N S TA L L AT I O N
I M P O RTA N T:
ISOLATE YOUR OVEN FROM THE ELECTRICAL SUPPLY BEFORE PERFORMING
INSTALLATION OR MAINTENANCE.
Installation should be carried out according to the instructions by a professionally qualified
person only.
The manufacturer declines all responsibility for any damage to persons, animals or materials due
to incorrect installation.
F I T T I N G T H E A P P L I A N C E :
Fit the appliance into its surround (beneath a
worktop or above another appliance in a tall
housing) by inserting screws and plastic covers
into the 2 holes (A - fig.3) that can be seen in
the frame of the oven when the door is open.
For the most efficient air circulation, the oven should be
fitted according to the dimensions shown in fig. 1 & 2.
The rear panel of the cabinet must be removed so that air can circulate freely. The panel to which
the oven is fitted should have a gap of at least 70 mm at the rear for ventilation (fig.4 & fig.5).
D I M E N S I O N S
540mm
593mm
578mm
589mm
70mm
589mm
min 55
0mm
min 550
mm
560
mm
560
mm
555
mm
25mm
5mm
595
mm
70m
m
70m
m
20mm
540mm
593mm
578mm
555
mm
25mm
5mm
595
mm
20mm
116m
m
116
mm
D I M E N S I O N S
540mm
593mm
578mm
589mm
70mm
589mm
min 55
0mm
min 550
mm
560
mm
560
mm
555
mm
25mm
5mm
595
mm
70m
m
70m
m
20mm
540mm
593mm
578mm
555
mm
25mm
5mm
595
mm
20mm
116m
m
116
mm
Instruction manual
12
540mm
593mm
578mm
589mm
70mm
589mm
min 550mm
min 550mm
560mm
560mm
555mm
25mm
5mm
595mm
70mm
70mm
20mm
540mm
593mm
578mm
555mm
25mm
5mm
595mm
20mm
Dimensions
116mm
116mm
INSTALLATION
IMPORTANT:
ISOLATE YOUR OVEN FROM THE ELECTRICAL SUPPLY BEFORE PERFORMING
INSTALLATION OR MAINTENANCE.
Installation should be carried out according to the instructions by a professionally
qualified person only.
The manufacturer declines all responsibility for any damage to persons, animals or
materials due to incorrect installation.
FITTING THE APPLIANCE
Fit the appliance into its surround (beneath a
worktop or above another appliance in a tall
housing) by inserting screws and plastic covers
into the 2 holes (A - fig.3) that can be seen in
the frame of the oven when the door is open.
For the most efficient air circulation, the oven
should be fitted according to the dimensions
shown in fig. 1 & 2.
The rear panel of the cabinet must be removed so that air can circulate freely. The
panel to which the oven is fitted should have a gap of at least 70 mm at the rear
for ventilation (fig.4 & fig.5).
540mm
593mm
578mm
589mm
70mm
589mm
min 550mm
min 550mm
560mm
560mm
555mm
25mm
5mm
595mm
70mm
70mm
20mm
540mm
593mm
578mm
555mm
25mm
5mm
595mm
20mm
Dimensions
116mm
116mm
INSTALLATION
IMPORTANT:
Unplug your oven before
performing installation or maintenance
Installation should be carried out according to the instructions by a
professionally qualified person only.
The manufacturer declines all responsibility for
any damage to persons, animals or materials due to incorrect installation.
Fitting the appliance
Fit the appliance into its surround (beneath a worktop or above
another appliance) by inserting screws and plastic covers into the 2
holes (A - fig.3) that can be seen in the frame of the oven when the door
is open.
For the most efficient air circulation, the oven should be fitted
according to the dimensions shown in fig. 1 & 2.
The rear panel of the cabinet must be removed so that air can
circulate freely. The panel to which the oven is fitted should
have a gap of at least 70 mm at the rear
for ventilation (fig.4 & fig.5).
See below for full dimensional drawings of your oven to help with
installation.
N
OTE
: where ovens are to be matched with hobs, it is essential
to follow the instructions contained in the
manual
supplied with
the
hob
Plastic cover
Fig.3
Oven dimensions
Fig.2
Fig.1
Fig. 1
Fig. 2
Fig1
Fig2
