Caple C2220 Скачать руководство пользователя

Страница: 24 / 26

Instruction manual C2220

Please keep this instruction manual for future reference

The door is now ready to

reverse and reattach to the

oven.

Once the door is reversed, screw

(1) will now be in the lower

position, and screw (2) in the

upper position.

Insert the lower fixing pin (5) into

the lower hinge support (6).

The door reversal is now

complete.

Push screw (1) back up the

elongated hole to raise the

fixing pin, and tighten the screw

to secure it into place. Unscrew

screw (2) and move it down the

elongated hole to lower the

fixing pin.

Align the upper fixing pin with

the upper hinge support (4), and

then move the screw (2) up the

elongated hole to raise the

fixing pin into the hinge support.

Now tighten the screw (2) to

secure this into position.

P R O C E D U R E

D E S C R I P T I O N

I M AG E

Push screw (1) back up the elongated

hole to raise the fixing pin, and

tighten the screw to secure it into

place. Unscrew screw (2) and move

it down the elongated hole to lower

the fixing pin.

The door is now ready to reverse and

reattach to the oven. Once the door

is reversed, screw (1) will now be in

the lower position, and screw (2) in

the upper position.

Insert the lower fixing pin (5) into the

lower hinge support (6).

Align the upper fixing pin with the

upper hinge support (4), and then

move the screw (2) up the elongated

hole to raise the fixing pin in the

hinge support. Now tighten the screw

(2) to secure this into position.

The door reversal is now complete.

The door is now ready to

reverse and reattach to the

oven.

Once the door is reversed, screw

(1) will now be in the lower

position, and screw (2) in the

upper position.

Insert the lower fixing pin (5) into

the lower hinge support (6).

The door reversal is now

complete.

Push screw (1) back up the

elongated hole to raise the

fixing pin, and tighten the screw

to secure it into place. Unscrew

screw (2) and move it down the

elongated hole to lower the

fixing pin.

Align the upper fixing pin with

the upper hinge support (4), and

then move the screw (2) up the

elongated hole to raise the

fixing pin into the hinge support.

Now tighten the screw (2) to

secure this into position.

The door is now ready to

reverse and reattach to the

oven.

Once the door is reversed, screw

(1) will now be in the lower

position, and screw (2) in the

upper position.

Insert the lower fixing pin (5) into

the lower hinge support (6).

The door reversal is now

complete.

Push screw (1) back up the

elongated hole to raise the

fixing pin, and tighten the screw

to secure it into place. Unscrew

screw (2) and move it down the

elongated hole to lower the

fixing pin.

Align the upper fixing pin with

the upper hinge support (4), and

then move the screw (2) up the

elongated hole to raise the

fixing pin into the hinge support.

Now tighten the screw (2) to

secure this into position.

The door is now ready to

reverse and reattach to the

oven.

Once the door is reversed, screw

(1) will now be in the lower

position, and screw (2) in the

upper position.

Insert the lower fixing pin (5) into

the lower hinge support (6).

The door reversal is now

complete.

Push screw (1) back up the

elongated hole to raise the

fixing pin, and tighten the screw

to secure it into place. Unscrew

screw (2) and move it down the

elongated hole to lower the

fixing pin.

Align the upper fixing pin with

the upper hinge support (4), and

then move the screw (2) up the

elongated hole to raise the

fixing pin into the hinge support.

Now tighten the screw (2) to

secure this into position.

The door is now ready to

reverse and reattach to the

oven.

Once the door is reversed, screw

(1) will now be in the lower

position, and screw (2) in the

upper position.

Insert the lower fixing pin (5) into

the lower hinge support (6).

The door reversal is now

complete.

Push screw (1) back up the

elongated hole to raise the

fixing pin, and tighten the screw

to secure it into place. Unscrew

screw (2) and move it down the

elongated hole to lower the

fixing pin.

Align the upper fixing pin with

the upper hinge support (4), and

then move the screw (2) up the

elongated hole to raise the

fixing pin into the hinge support.

Now tighten the screw (2) to

secure this into position.

Содержание C2220



























Результаты поиска

Содержание C2220

Отзывы:

Похожие инструкции для C2220

Бренды по названию

Популярные бренды

Caple C2220, Инструкция по эксплуатации

Результаты поиска

Содержание C2220

Отзывы:

Похожие инструкции для C2220

Бренды по названию

Популярные бренды