Instruction manual C857i
Instruction manual C857i
14
15
Please keep this instruction manual for future reference
Please keep this instruction manual for future reference
U S I N G YO U R I N D U C T I O N H O B
TO S TA RT C O O K I N G
If the display flashes
alternately with the heat setting this means that:
-
You have not placed a pan on the correct cooking zone.
-
The pan you’re using is not suitable for induction cooking.
-
The pan is too small or not properly centred on the cooking zone.
Touch the ON/OFF control. Once turned on, the buzzer beeps once the
timer control shows ‘00’ and the heating zone selection controls
show or / Indicating that the induction hob has entered the state
of standby mode.
Place a suitable pan on the cooking zone that you wish to use.
Make sure the bottom of the pan and the surface of the cooking zone
are clean and dry.
Touch the heating zone selection control and an indicator where you
touched will flash.
Adjust the heat setting by touching the slider control. If you don’t choose
a heat setting within 1 minute, the induction hob will automatically
switch off. You will need to start again at step 1. You can modify the heat
setting at any time during cooking.
W H E N YO U H AV E F I N I S H E D C O O K I N G
U S I N G T H E B O O S T
Touch the heating zone selection control that you wish to switch off.
Turn the cooking zone off by sliding to the left on the slider control
until the display shows “0”.
Turn the hob off completely by touching the ON/OFF control.
Beware of hot surfaces
‘H’ will show which cooking zone is hot to touch. It will disappear
when the surface has cooled down to a safe temperature. It can also
be used as an energy saving function if you want to heat further
pans, use the zone that is still hot.
AC T I VAT E T H E B O O S T F U N C T I O N
Touch the heating zone selection control.
Touch the boost control
, the zone indicator shows ‘b’ and the
power reaches max.