▇
▇
▇
▇
TABLE OF CONTENTS
Contents
1. Installation
P1~3
2. Safety & Cleaning
P4~5
3. Alternative Methods Of Extraction
P6
4. Operation
P7
5. Fitting Charcoal Filter / Bulb Replacement
P8
6. Electrical Connections
P9
7. Not Working Properly
P12
8. Technical Data
P12
The extractor is designed to give you the option to extract to the outside
(via an exterior wall) with ducting, or to re-circulate air through additional
filters to minimise odours, steam and condensation.
The choice is yours to decide at installation, Both options are explained
in this booklet.
We recommend that you read this booklet from cover to cover before
attempting to install or operate the extractor.
THESE INSTRUCTIONS MUST BE STRICTLY ADHERED TO,
FAILURE TO COMPLY COULD RESULT IN OVERHEATING AND
SERIOUS DAMAGE TO YOUR APPLIANCE
To secure the product to the wall you must initially remove the
grill/anti-grease filters. This is achieved by opening the front panel and
pushing the two catches (A) upwards which will then release the grill.
P1
Installation
General description
