4.2.2 Functional Inspection
A functional check should be performed on the
Davit Application System prior to every use.
The following functional tests should be done;
and the results recorded on the “Inspection
Log” sheet (Section 4.3).
1. System Operation and Adjustments
The UCL Tank Pod System contains
operational parts that may include pulleys
and /or rollers. These parts must be
carefully checked for chips, cracks, or worn
areas that can cause malfunction during
operation of the system.
Make sure that all the adjustments are in full
functional condition. This may include parts
that contain pins, bolts, tri-screws, and
adjusting screws. There also is mechanical
adjustments which may include adjustable
legs, sleeves, adjustable sliding blocks, and
brackets. These areas must be kept clean
from debris and corrosion for proper
functional use. If any part of the system that
includes all listed items above becomes
damaged contact your local dealer or
manufacturer for parts and/or service.
Page 26
