Capintec CAPTUS 600 Скачать руководство пользователя страница 129 | Manualshive

Страница: 129 / 218

Capintec CAPTUS 600 Скачать руководство пользователя страница 129

CAPINTEC, INC.

CAPTUS

®

600

If the Standard has not been measured “today”, the Standard Measurement procedure will
be performed and then the uptake procedure will be entered. Press

HOME

when the

Measure Neck Screen appears if it is not time for an uptake.

If the Standard has been measured “today”, the TU uptake measurement procedure will be
entered.

UPTAKE MEASUREMENT

When it is time to perform the uptake, select the patient from the patient list.

If the selected Standard has not been measured for the current calendar day, or if the
distance has been changed, the TU Standard measurement procedure will be performed.

When the Standard has been measured with the same distance, measure the neck and thigh
according to the directions in CHAPTER 8: THYROID UPTAKE: GENERAL
INSTRUCTIONS.

VIEWING RESULTS

After the neck and thigh have been measured, the Results Screen (Figure 11-14) will appear.

NECK (N) : 3148 cpm

THYROID (T:N-B) : 1246 cpm

DECAY FACTOR (D) : 0.998 cpm

UPTAKE (T/DAS) : 28.8%

ENTER INITIALS:

DOSE (A) : 1.0

μ

THIGH (B) : 1902 cpm

STANDARD (S) : 4328 cpm/

μ

Ci

Ci

Figure 11-14

Input your initials and press

ENTER

. The Graphics Screen (Figure 11-15) will appear.

November 07

THYROID UPTAKE: STANDARD CAPSULE METHOD

11-9

«
...
127
128
129
130
131
...
»

Содержание CAPTUS 600



























































































































































































































Отзывы:

Нет отзывов