Capintec CAPTUS 3000 Скачать руководство пользователя страница 263

Страница: 263 / 338

CAPINTEC, INC.

CAPTUS

3000

Saving the Results

1. To save the measured data, click the

button or press

Alt+S

on the

Time Activity Analysis screen. A pop-up menu (Figure 12-8) with two options is displayed:

Figure 12-8

•

Save

– This option saves all the results and the spectrum on the screen as a TAA file

(.taa file). These files can be reopened in the Time Activity Analysis module, by

clicking the

button on the menu bar or pressing

Alt+O

•

Export

– This option saves the raw and corrected results in tabular form in an

Microsoft Excel file (.xls file). These results can be viewed and plotted through
Microsoft Excel only.

a. If you click on

Save

, the screen appears as shown in Figure 12-9.

Figure 12-9

The default folder for saving the file is Captus3000\Data\. Type in the file name and

click the

button or press

Alt+S

to save as .taa file.

Note: It is recommended that the Save as type: is not changed from Time Activity

Results (*.taa)

November 13

TIME ACTIVITY ANALYSIS

12-7

Содержание CAPTUS 3000



















































































































































































































































































































































Результаты поиска

Содержание CAPTUS 3000

Отзывы:

Capintec CAPTUS 3000, Руководство пользователя, Страница: 263 / 338

Результаты поиска

Содержание CAPTUS 3000

Отзывы: