Capintec CAPTUS 3000 Скачать руководство пользователя страница 110

Страница: 110 / 338

CAPINTEC, INC.

CAPTUS

3000

Figure 7-11

Click the

button or press the

key to update the patient information, or else

click the

button or press the

key to return to Figure 7-1 Main Thyroid

Uptake Screen.

3. Click the

icon. The screen appears as shown in Figure 7-12.

Figure 7-12

QUICK TIPS:

•

Click in the text box or use the

Tab

key to move from one text box to another.

To select from drop-down list use





keys.

4. Click in the text box to be edited and type over the existing information.

Note: All fields in bold are required before the uptake procedure can begin.

5. Click the

button to save changes or click the

button to cancel the

changes and return Figure 7-1 Main Thyroid Uptake Screen.

7-14

THYROID UPTAKE

November 13

Содержание CAPTUS 3000



















































































































































































































































































































































Результаты поиска

Содержание CAPTUS 3000

Отзывы:

Capintec CAPTUS 3000, Руководство пользователя, Страница: 110 / 338

Результаты поиска

Содержание CAPTUS 3000

Отзывы: