Capin Billy's Whiz Bang, Руководство пользователя

Страница: 8 / 44

PAGE 6
Proper assembly, folding and unfolding of the scooter are essential. Always fold and unfold your scooter on a level, stable surface,
in an area which allows you plenty of room to work.
Your new scooter MUST be fully charged before its first use and after each successive use. Please read the instructions
carefully and follow them fully. Always charge your electric scooter indoors in a well-ventilated area.The charging area should
be non-flammable, dry, level, with good ventilation, and in an area that cannot be reached by children or animals. Do not place
the scooter and Charging Transformer in direct sunlight, near a heat source (water heater, furnace, fireplace, etc.), or in contact
with moisture while charging.
1. Remove your electric scooter from the shipping carton.
2. Place your electric scooter on a level, dry surface and fold the kickstand down.
PRIOR TO CHARGING
• Make sure the power cord, charging cable and charging port are in good condition.
• Do not plug the supplied transformer into AC outlets with multiple sockets while other power cords are plugged in.
• Verify that your Charging Transformer is designed for the voltage in your country.
• We highly recommend that you use only GFCI outlets, or use an adapter to convert standard outlets to GFCI.
These inexpensive adapters are available at most hardware stores.
• If you notice a strange smell, vapors or smoke coming from the Charging Transformer or Batteries, unplug the
Charging Transformer cord immediately! Take your scooter and transformer to your Dealer for service.
3. Charging & Assembly