Capetti Elettronica WineCap WSD15IIDIST, Руководство пользователя

Страница: 4 / 10

WSD15IIDIST
User Manual
CAPETTI ELETTRONICA s.r.l. - Strada Stratta, 57
10090 CASTIGLIONE TORINESE - TORINO - ITALY
VAT 04837130014 - Phone 011.981.98.11 - Fax 011.981.98.210
e-mail
info@capetti.it - web www.capetti.it
WA0416E_WSD15IIDIST_User Manual_R05
V5.0
6. Device pre-set and use mode.
a. Wireless Mode:
No setup operation is needed. Typically, the system is configured from factory, so the device is already associated to the system
basestation . The device is in STANDBY mode (
refer to Picture 4 - Status table - Radio signal quality
) for which is necessary to start it
with the TEST command (
refer to 9 - Installation procedure.
).
Otherwise, in case the device is in FACTORY RESET mode (
refer to Picture 4 - Status table - Radio signal quality
), that means it's ready
for connecting to an existing system, in order to associate it, make reference to the “ WineCap System - User Manual R30 ”
software manual. Is necessary to use the " WineCapManager " software on the PC connected to the basestation that will be
coupled with the device.
b. USB Logger Mode:
For this operation mode, stand- alone with data downloads through USB, the connection with the PC and the “ WineCapManager ”
running on it is necessary in order to modify the device 's operation mode. The sampling interval must be set with the device in
"
STAND-ALONE " (
refer to 7
) mode and automatically, the device 's clock is aligned with the PC's clock, to assure the temporal
reference of the sample.
Sampling operations start may be selected disconnecting the USB cable or giving the proper command with the magnetic key.
(
refer to 10 - Stand-alone USB datalogger installation.
). More details on device 's connection/disconnection through the USB cable are
available on the WineCap System - User Manual R30 manual.
c. On field transition from USB to Wireless datalogger:
This transition is practicable in field, during the sampling period, using the wireless network association command. When the
association is done, the
datalogger becomes a wireless datalogger and, besides sending new measures to the basestation , starts
a download process towards the same basestation of the measures acquired during the stand-alone period (
refer to Picture 5 -
Stand-alone datalogger status
).
7. Wireless device user interface.
The user interface consists of a “virtual” button that can be activated using the WineCapKey and of a two-colors led.
To give a command, user must approach the WineCapKey to the device’s sensible area and keep it in that position.; the following
picture (
Picture 2 - WineCapKey positioning
) shows device’s sensible points.
Picture 2 - WineCapKey positioning
LED