using the glow light as a night light
To
TURN ON
the glow light, press the ZZZZ–GLOW button area, located on the top of the unit,
at any time the alarm is not sounding.
To
TURN OFF
the glow light, while the alarm is not sounding, press the ZZZZ–GLOW button area again.
LED glow light / night light feature
Your CR10 features an ambient glow light that can be used as a night light. The glow intensitity can be adjusted to
one of three presets levels by using the DIMMER button which is linked to the units display as well.
• When the alarm sounds, the glow light will illuminate in addition to the alarm sounding. Tapping the ZZZZ–GLOW
button area will snooze the alarm and turn the glow light off.
• If the glow light is already on when the alarm sounds, the glow light will remain on during the alarm sounding.
Tapping the ZZZZ–GLOW button area will snooze the alarm but the glow light will remain on.
notes:
There are two ways to turn off the glow light when the alarm sounds. First option is to slide the ALARM switch to ‘OFF’
to cancel the alarm, then press the ZZZZ–GLOW button area to turn the glow light off. You will need to reset the alarm if you
want to have it sound the next day.
Second option, press the POWER button to turn the CR10 off, then press the ZZZZ–GLOW button area to turn the glow light off.
This will silence the alarm and automatically reset it for the next day.
adjusting the brightness
Repeatedly press the DIMMER button to toggle the level of brightness for the LED glow light as well as the unit
display. The three presets levels to choose from are low, medium and high. The factory default setting is “high”.
