Reconnecting your Bluetooth devices
Once your Bluetooth device has been paired with CR60, it is simple to reconnect them.
1. Make sure that CR60 is powered on and within range.
2. Select “CR60” from the list on your Bluetooth device.
3. The Bluetooth LED indicator on the display will change from flashing to solid,
indicating that your Bluetooth device is reconnected to CR60.
Notes:
For the best audio performance, turn the volume on your Bluetooth source
device all the way up.
USB charging port
The CR60 features one (1) USB port located on the rear of the unit (see “location of
controls”). The USB port support powering and charging most devices including
iPhones, iPads, iPods, E-readers, digital cameras and more. (USB cable sold
separately).
Specifications
General:
Power Source………………..................DC 5V 2.2A Adapter (Center Positive)
AC Power Supply……………………………………..100-240V ~ 50/60Hz 0.8A
Class 2 Bluetooth Ranges ………………………………………………33ft (10m)
Supported Bluetooth Profile………………………………………………….A2DP
Battery Backup……………………………………..2 x 1.5V “AAA” size batteries
Speaker………………………………………………………………….1 x 4 ohms
Output Power.........................................................................................2W x 1
USB Jack DC Power Output……………………………………………..…5V 2A
Radio section:
Frequency Range (FM)………………………….………………..87.5—108 MHz
Specifications are subject to change without notice.
For further assistance, please visit our website at
hellocapello.com
or contact
customer service at
or
1-855-896-1795
Life Lab International Ltd.
The Bluetooth ® word mark and logos are registered trademarks owned by Bluetooth
SIG, Inc. and any use of such marks by Life Lab International LTD. is under license.
