1. In standby mode, press and hold the ALARM button and the display will begin
flashing.
2. Press the TUNE DOWN / HOUR or TUNE UP / MIN button to set the desired alarm
time.
3. Press ALARM button to confirm the alarm time set.
4. Amber LED of alarm source indicator (default as alarm radio) will blink. Press
TUNE DOWN / HOUR or TUNE UP / MIN button to set the desired alarm source
(Buzzer or Radio). Amber LED of the selected alarm source indicator will light up.
5. Press ALARM button to confirm the alarm source set, the volume level will blink on
the display (there is no volume setting if alarm source is set to Buzzer).
6. Press TUNE DOWN / HOUR or TUNE UP / MIN button to set the maximum alarm
volume.
7. Press ALARM button to confirm the alarm set.
Notes:
To deactivate the alarm, press ALARM button, the amber LED of alarm source
indicator will turn off.
Before setting the alarm, make sure that the clock time is set correctly (see “Setting the
clock”).
Silencing the alarm
When the alarm sounds, press ALARM or POWER ON / OFF button to silence the
alarm.
Snooze
1. When alarm sounds, pressing the SNOOZE / BRIGHTNESS button will temporarily
silence the alarm. The alarm will sound again after approximately 10 minutes.
2. To extend the snooze duration, repeatedly press the SNOOZE / BRIGHTNESS
button to cycle through and select one of the snooze presets.
Notes:
Once the snooze function has been activated, press the SNOOZE /
BRIGHTNESS button anytime and the display will show the remaining time.
Repeatedly press the SNOOZE / BRIGHTNESS button to adjust or modify the current
snooze time setting.
