Position the drawer so that the drawer rollers slide inside the frame rails C channel. Slide the drawer into the frame rail. The latches will engage when the
frame is completely mounted.
Using a 3/4 inch wrench, install the 1/2 inch stop bolts (Item No. 4) on each of the frame
rails. Tighten the bolts all the way to the bolt shoulder. Turn the
Cap-Pack
®
Sport
over so
the drawer is rightside up.
Using the Torx driver and 3/8 inch wrench, install the provided screws (Item No. 7) and nuts (Item
No. 8), to secure the latch guards to the drawer. Note: The nut is installed on the outside of the
guard.
072018
3
STEP
4
STEP
5
STEP
Stop Bolt
(two locations)
