Getting Started
Before using CANYON CNP-WF511, please make sure that the PC and the device
are within range of an access point (802.11b, 802.11g, or 802.11b/g).
Connecting to Device
1.
Power off PC.
2.
Open up PC casing and
locate an available PCI
slot on the main board.
3.
Insert wireless PCI
adapter into PCI slot.
Please apply adequate
pressure on the device
if necessary to make
sure all pins are intact.
4.
Secure the device with
a mounting screw and
close up PC chassis.
5.
Attach the external
antenna to the device.
6.
Power on PC.
NOTE:
It is recommended to install
driver with Driver
Installation Wizard which
will install both device
driver and utility program.
