Canyon CN-MP3Sx, Руководство пользователя

Страница: 4 / 18

6 7
1. Power On / Play / Pause / Stop / Power Off
Press the button to power on the player
Playback or pause playback of music or voice file
Press and hold to power off the player
2. FORWARD / BACKWARD
Press to skip to next track
Press and hold to fast forward within the current track
Press to skip to previous track
Press and hold to fast reverse within the current track
3. MENU
Press to enter menu or sub-menus to configure different
settings of the player
Press to confirm the selected menu option
Press and hold to exit menu and return to playback mode
4. A-B
Repeat between Section A and B during music mode
Press to start voice recording
5. MIC
Built-in microphone for voice recording
6. VOLUME (+)/ VOLUME (-)
Press to increase the volume level
Press to decrease the volume level
7. USB Port
You can upload / download files via this port with the USB
cable connected to your
computer.
8. Earphone Jack
Plug the earphone into the jack and listen to your player.
9. Battery Door
10. Hanging Rope
Software Installation
If you are using Windows ME / XP / 2000 or Mac 9.2.2 or
above, it is not necessary to install any driver. Simply connect
the player to your PC, the player will be detected and the
generic driver will be installed. The built-in flash memory of
the player will be shown under "My Computer" as a
Removable Disk Drive. After it is finished, you can upload,
download and manage the files in the player.
However, you still need to install the driver from software
installation CD if you want to upgrade the firmware or
completely format the flash memory of the player.
If you are using Windows 98 (2nd Edition), you are required to
install the driver from the software installation CD. Otherwise
you are not able to operate the player, because Windows 98
does not integrate with any generic driver to support USB
mass storage device. Therefore, users are required to run the
installation CD to provide driver for Windows 98 to complete
with the installation for the player.
1
2
Attention
Windows98 (2nd Edition)
Step 1.
Insert the software installation CD into the CD-ROM drive. If the
setup program does not run automatically, do steps 2 to 3.
Otherwise, skip to step 4.
Step 2.
Click Start -> Run.
How To Install Driver - Step by Step