background image

6.1

PREPARATIONS FOR OPERATION

6.1.1

Fuel Handling

• Petrol (gasoline) fuel is flammable. Never

refuel or service the fuel system while smok-
ing or when near open flames or sparks.

• Never refuel the machine when the engine is

running

• After stopping engine, the engine becomes

hotter. Therefore fuel must be handled with
great care when refueling. Do not spill fuel
out of filler cap.

 

DANGER

1. Check the fuel gauge visually. If fuel is not reserved

enough, open the filler cap and pour fuel.

Fuel to be used :

page 28

Fuel tank capacity :

page 28

• When fuel gauge needle approaches empty

"E", refuel as soon as possible.

• When using the unit on slopes, refuel less

than the upper fuel limit for the fuel filter in
the lubrication port.

2. Close the filler cap firmly after refueling

N O T E

–  13 –

6

OPERATION

6.

OPERATION

Before reading this chapter, be sure to read "RULES FOR SAFE OPERATION AND WORK" in Chapter 3
(

pages 5 to 8).

Concerning the operation and control, be sure to follow the instructions given in this chapter. If you do not
have a complete understanding of the operating and control system or safety devices, never operate the
machine based on your own judgment.

Fuel 
filter

Fuel
gauge

Upper limit
of oil level

Filler cap

Содержание CM1801




























































Отзывы: