Canvision CAD9008H2, Руководство пользователя

Страница: 20 / 102

20
【 Left Limit 】 Began to limit scanning Settings, was registered date 【 right Limit 】 , thus set up corresponding limit
scanning.
【 Add Preset 】 Add presets point to the cruise lines.
【 Delete Preset 】 Cruise lines from deleting preset points.
【 Clear Tour 】 Remove the cruise line designated.
Note
: some equipment doesn't fully support all function, depending on the specific yuntai equipment and different.
【
Control
】
PTZ Control
【
Tour Scan
】
Point between cruise control.
【
Pattern Scan
】
Track patrol control.
【
PTZ Reset
】
Remove all Settings, original reset to the original state.
【
Limit Scan
】
Yuntai boundary scan control around.
【
Auto Pan
】
Remove the cruise line designated
Note
: some equipment doesn't fully support all function, depending on the specific yuntai equipment and different.
3.9 Alarm control
【 Set Alarm 】 Selection need protection channel, click confirm corresponding channel after in protection status
【 Clear Alarm 】 Remove protection condition, not alarm input to react
【 Alarm Output 】 Open the alarm output.In the premise of no trigger alarm input,user can operate the output.for
example, some alarm switch is connected with a lamp,lamp is open when alarm is trigered
【 All 】 Can choose all the channels