Step 1
8
MODEL NO. 064-3181-8
A
SS
E
M
B
LY
– WALL MOUNTED
Installation tips
•
This heater must be fitted onto a flat wall. Ideally, install the heater directly to a brick wall, masonry surface or the
internal wooden frame of a plasterboard wall. If the wooden frame behind the plasterboard is not accessible, use a
minimum of four heavy-duty anchors that are suitable for the weight of the heater.
•
We do not recommend that the heater be fitted to a wall covered in blown vinyl wallpaper, polystyrene tiles or
other flammable materials.
•
It is important that the heater never be installed under a shelf or flammable materials such as curtains.
•
If the heater is to be mounted on to a plasterboard wall with wooden studs, make sure the wall is strong and
stable enough to hold the weight of the appliance. The vapour control barrier must not be damaged, and the
structural members of the house must not be damaged. We recommend minimum 1/2" (12 mm) thick plasterboard.
•
Before drilling into walls, always check that there are no hidden wires, pipes, etc. Make sure that screws and wall
plugs supplied are suitable for supporting the unit on your surface. Consult a qualified person if you are not sure.
The maximum distance from the two bottom holes can't
exceed 19 1/2" (50 cm) from the floor.
FLOOR
3 1/8" (7.9 cm)
16" (40.6 cm)
MAX 19 1/2" (50 cm)
19" (48.3 cm)
16" (40.6 cm)
Ø6
4 x Ø10
