background image

Product name

Model No.

Rated Heat Output

Fuel

Gas Supply

Manifold Pressure

Orifice Size (diameter)

Gas Supply Pressure

Outdoor Fire Table

4

SPECIFICATION

IMPORTANT SAFETY INFORMATION AND PRECAUTIONS

085-1557-8

35,000 BTU/hr  

Propane-LP

20 lb (9 kg) LP-Gas cylinder

11" W.C.

1.9 mm  

Max 250 PSI

    When the appliance is for connection to a fixed piping system, the installation must conform 
with local codes, or in the absence of local codes with the National Fuel Gas Code, ANSI 
Z223.1/NFPA54; International Fuel Gas Code, Natural Gas and Propane Installation Code, CSA 
B149.1; or Propane Storage and Handling Code, B149.2, as applicable. 

    

The LP gas supply cylinder to be used must be:

  1-Constructed and marked in accordance with the U.S. Department of Transportation (D.O.T.)  
Specifications for LP-Gas Cylinders, or the Standard for Cylinders, Spheres and Tubes for Trans-
portation of Dangerous Goods and Commission, CAN/CSA-B339 as applicable;
  2-Provided with a listed overfilling prevention device;
  3-Provided with a cylinder connection device compatible with the connection for the appliance.

    

Always place the appliance on a firm and level surface. 

    

Solid fuels may not be burned in this gas appliance. When using decorative lava rocks, use only 

the lava rocks we provided (INCLUDED).

    

The appliance must be used only outdoors in a well-ventilated space and must not be used in 

a building, garage or any other enclosed area.

    

When in use, keep the appliance area clear and at least 40" / 101.6 cm side clearance from com-

bustible materials, gasoline and other flammable liquids and vapours. Do not use the appliance 
under overhead combustible surfaces. Certain items or materials, when stored under the appli-
ance or nearby, will be subjected to radiant heat and could be damaged. 

    

When in use, keep cylinder area clear and at least 30" / 76.2 cm side clearance from combusti-

ble materials, gasoline and other flammable liquids and vapours. Do not use the appliance under 
overhead combustible surfaces. Certain items or materials, when stored under the appliance or 
nearby, will be subjected to radiant heat and could be damaged.

    

When in use, keep cylinder at least 30" / 76.2 cm side clearance from fire table. DO NOT trip 

over the gas pipe between fire table and cylinder when passing through, to prevent cylinder 
from tipping over.

Содержание Dashley 085-1557-8














Отзывы: