ASSEMBLY
6
ASSEMBLY
7
Step 1
Requires
C, D, BB, DD
Place the back frame (C) on a soft, flat surface. Attach the seat frame
(D) to the back frame (C) by lining up the bolt holes on the back frame
(C) with the corresponding bolt holes on the seat frame (D). Insert the
M6x30 combination bolt and washer (BB), and loosely tighten using the hex
key (DD). Do not completely tighten until all assembly is completed.
Step 4
Requires
D, E, CC, EE
Place the support tube (E) onto the seat frame (D) as shown. Line up the bolt holes on
support tube (E) with the corresponding bolt holes on the seat frame (D). Insert
M8x20 combination bolt and washer (CC), and lightly tighten using the wrench (EE).
Do not completely tighten until all assembly is completed.
ASSEMBLY
Model No. 088-2211-8
Step 3
Requires
B, C, D, AA, DD
Repeat the same step for the left arm (B).
Step 2
Requires
A, C, D, AA, DD
Attach the right arm (A) to the seat frame (D) by lining up the bolt
holes on the right arm (A) with the corresponding bolt holes on the
seat frame (D). Insert M6x15 combination bolt and washer (AA),
and loosely tighten using the hex key (DD). Attach the right arm (A) to
the back frame (C) by lining up the bolt holes on the right arm (A)
with the corresponding bolt holes on the back frame (C). Insert M6x15
combination bolt and washer (AA), and loosely tighten using the hex key
(DD). Do not completely tighten until all assembly is completed.
C
D
BB
C
D
A
AA
AA
AA
C
D
B
AA
AA
AA
D
E
CC
CC
NOTE:
Do not
completely tighten.
NOTE:
Do not
completely tighten.
NOTE:
Do not
completely tighten.
NOTE:
Do not
completely tighten.