ASSEMBLY
Step 15
To convert the swing into a hanging bed, push down the spring ring-pull on rear
seat support bar
10
first.Then release the back support tube from the rear seat
support bar
10
and fasten it to the U-shaped bracket on the rear leg crossbar
6
.
When used as a bed, the seat assembly should be secured by these holders and
not allowed to swing.
13
Step 16
Attach the net
21
to the large canopy
19
by
hook-and-loop strip.
The net zipper goes in the centre of the
top crossbar.
Your swing is ready for use!
Requires 19, 21.
Requires 6, 10, 11
10
10
10
11
11
10
6
11
21
