Canvas 088-0538-4, Руководство по сборке

Страница: 20 / 26

Fig. 1
Fig. 4
Fig. 3 Fig. 2
Your gas appliance must be installed on a flat, stable surface, away from any
combustible materials or construction.
1-Remove the appliance from container box and place it on any level, outdoor,
non-combustible surface.
NOTE: Do not place this appliance on grass or dirt area. This may prevent proper
safety venting.
2-Open the gas door and put the cylinder inside.
Your gas appliance comes assembled, ready for a gas connection.
1) Open the door and control valve outside. See Fig 4.
2) Put the cylinder into the cylinder rack. See Fig 5.
3) Connect the regulator and the cylinder as per Fig. 6. Make sure there is no leakage
or damage (please refer to “Leak Test” on page 20 and the safety information
on page 6).
4) Turn the butterfly nut on the cylinder frame, so that the nut is held against the
bottom of the cylinder, to make sure the cylinder can be fixed. See Fig 7.
5) Disconnect the regulator and the cylinder as per Fig 8.
3-Unscrew the battery box as shown in Fig. 1. Insert the negative electrode side
of the battery into the bottom of battery box as shown in Fig. 2. Then screw the
battery box as shown in Fig. 3.
Fig. 8 Fig. 7
Fig. 5 Fig. 6
Fig. 7
LOCATION
SETUP
GAS CONNECTION
Fig. 6
FIRE TABLE OF RIDEAU 5-PC FIRE DINING SET
20