
41
© 2021, Elon Group AB. All rights reserved.
There are three ways to remove collected water.
1 — Use the bucket
• When the unit is off and if the bucket is full, the Full indicator light will light.
• When the unit is on and if the bucket is full, the compressor and the fan turn off, the Full indicator light comes on, and the digital
display shows P2.
• Slowly pull out the bucket. Grip the left and right handles securely, and carefully pull the bucket straight out so water does not spill.
Do not put the bucket on the floor because the bottom of the bucket is uneven. Otherwise the bucket will fall and cause the water to
spill.
• Empty the water and replace the bucket. The bucket must be in place and securely seated for the dehumidifier to operate.
• The machine will re-start when the bucket is restored to its correct position.
REMOVING THE COLLECTED WATER
1 —
Pull out the bucket a little.
2 —
Hold both sides of the bucket and pull it straight out of the unit.
3 —
Pour the water out.
Pump hose dropped
Reinstall pump hose properly
NOTES:
• When you remove the bucket, do not touch any parts inside of the unit. Doing so may damage the product.
• Be sure to push the bucket gently all the way into the unit. Banging the bucket against anything or failing to push it in securely may
prevent the unit from operating correctly.
• If the pump hose drops when you remove the bucket, you must reinstall the pump hose properly in the unit before replacing the
bucket in the unit.
• When you remove the bucket, if there is any water inside the unit you must dry it.
• When the unit is on, if the bucket is removed, the compressor and the fan will turn off, then the unit will beep 8 times and the digital
display will show Eb.
• When the unit is off, if the bucket is removed, the unit will beep 8 times and the digital display will show Eb.
2 — Continuous draining
• Water can be automatically emptied into a floor drain by connecting a water hose to the unit (lD ≥
Φ
5/16", not included) with a
female threaded end (ID: M=1", not included).
NOTE:
On some models, the female threaded end is included.
• Remove the plastic cover from the rear drain outlet of the unit and set aside, then insert the drain hose through the drain outlet of
the unit and lead the drain hose to a floor drain or a suitable drainage facility.
• When you remove the plastic cover, if there is some water in the rear drain outlet of the unit you must dry it. Make sure the hose is
secure so there are no leaks and the end of the hose is level or sloping downwards to let the water flow smoothly.
• Direct the hose toward the drain, making sure that there are no kinks that will stop the water flowing. Make sure the water hose is
lower than the drain hose outlet of the unit.
• Select the desired humidity setting and fan speed on the unit for continuous draining to start.
NOTE:
When the continuous draining feature is not being used, remove the drain hose from the outlet, and dry the water in the continuous
drain hose outlet.
Remove the plastic
cover by twisting
counter-clockwise.
Female threaded end
Drain hose