3
93
English
Problem
Possible cause
Solution
The BRA 3 / VRA
3 does not turn on
automatically.
1. The standby function is factory set to NSB.
The system must be turned on manually.
1. Switch the standby function to AUT.
2. The device has been switched off via the
“ON / Standby” button of the remote control
or the “Power” button of the TV remote
control (when using the IR learning function).
2.1. Switch on the BRA 3 / VRA 3 via the “ON / Standby”
button of the remote control and wait until it automati-
cally switches to the standby mode, next time.
2.2. Delete the “Power” button of your TV remote from the
BRA 3 / VRA 3 to prevent it from switching off together
with your TV.
3. The signal at AUX (Line) input is too low.
3. Increase the output level on your source device.
BRA 3 / VRA 3
switches off
automatically.
1. The standby function ECO, AUT, LAN or NSB is
activated..
1. Select the standby function MAN.
2. The infrared command for Standby has been
learned incorrectly.
2. Learn the infrared command for Standby again.
BRA 3 / VRA 3
does not turn off
automatically.
1. The standby function MAN is activated.
1. Activate the standby function ECO, AUT, LAN or NSB.
2. The standby function AUT or NSB is activated
and the source device also transmits a carrier
signal in standby mode (optical or coaxial
digital input, only).
2. Disconnect the source device from the mains or
manually switch off the BRA 3 / VRA 3.
