100
English
Problem
Possible cause
Solution
The BT input cannot
be selected via the
“Input” buttons.
The function BT Select [BTS] is activated.
The switching happens in this case automatically as soon as
the Soundbar 9 detects an audio signal from the device.
If unwanted, set BT Select (BTS) to manual.
The Soundbar 9 does
not automatically
switch to the BT input.
1. The BT Select function is deactivated (MAN).
1. Activate the BTS function (AUT).
2. Bluetooth
®
is disabled on your device.
2. Activate Bluetooth
®
on your device.
3. The Soundbar 9 is connected to
another device.
3. Disable Bluetooth
®
on the other device.
4. The device is not paired with
the Soundbar 9.
4. Pair your device with the Soundbar 9.
No playback via
Bluetooth
®
wireless
technology.
1. There is no connection between the Soundbar
9 and the (mobile) device.
1. Connect the (mobile) device as described.
2. The (mobile) device is paired,
but it does not play.
2.1. The (mobile) device needs to be reconnected.
2.2. Set the volume on the (mobile) device to the
maximum possible value.
2.3. Increase the volume of the Soundbar 9.
2.4. Make sure that sources of interference, such as a
WiFi router or a laptop, are not placed in close proximity
to the Soundbar 9.
2.5. Simultaneous operation via WiFi and Bluetooth
®
connection from a (mobile) device is not possible
without interference in some cases; therefore, disable
WiFi on the device.
3. You are out of reach (max. 10 m).
3. Reduce the distance between the Soundbar
and the (mobile) device.