35
Deutsch
English
Français
Espagnol
Initial installation
Before you can use the DM 90.2 you need
to assign the inputs to the connected source
devices. You will be asked to do this when
you first switch the device on.
To get to the
input configuration
press .
Use the “<” and “>” arrow keys to choose
names for the connected devices. You
must
confirm these by pressing “OK”.
To exit the
input config
menu press
to save all the entries. Then press to
end the initial installation and return to the
main menu.
Warning: The arrow keys and may
not be used when assigning the inputs.
Inputs that are defined as “not active” are
not shown in the main menu.