manualshive.com logo in svg

CANTO USA Aurora X1 Series, Руководство по эксплуатации, Страница: 14 / 61

Поделиться
Скачать
CANTO USA Aurora X1 Series Скачать руководство пользователя страница 14

Innovative Lighting Products

Followspot Operating Instructions

V 1.0   1/11/22

14

1092 West Atlanta Street, SE • Suite 600 • Marietta, GA 30060 • 888-252-5912 • [email protected] • cantousa.com 

5.5 Medium and Long Throw Configuration: Mounting the LED Engine

Step 5: Mounting the LED Engine (Continued)

Holding the LED engine, align the screws with the 4 holes on the LED engine and then resting the engine on the screw threads on the body of 
the LED engine.

Tighten the screws utilizing the TX27 on the back panel of the LED fixture. With the side panels open, locate the plastic cover on the LED 
engine. There will be a thin plastic cover protecting the LED engine’s glass. Remove the plastic cover and save all these items and the boxes 
and foam inserts in case items need to be serviced and sent back to the factory in the future. Each followspot part is shipped with every box 
and insert that is needed.

Содержание Aurora X1 Series






























































Отзывы:

Нет отзывов