SOURCE SELECTION
To switch from tuner to Bluetooth or Bluetooth to aux, push and
release the volume knob. To switch from aux back to tuner,
press the 1/EJ button.
PLAY/PAUSE
To play or pause the Bluetooth track, press the 5/PROG but-
ton in Bluetooth mode. The playback state is indicated on the
display. A “1” indicates content is playing and a “2” indicates it
is paused.
PREVIOUS/NEXT TRACK
To seek to the previous or next Bluetooth track, use the corre-
sponding SEEK button while in Bluetooth mode.
REWIND/FAST-FORWARD
To rewind through Bluetooth content, press the 3/REW button.
To fast-forward, press the 4/FF button. To end either of these
actions, press the same button again, or press the 5/PROG
button. Note that depending on the currently-playing applica-
tion on the mobile device, these may have different behaviors
(continuous scrub vs. skip ahead/back) or not be supported.
VOICE ASSISTANT
Your mobile device’s voice assistant can be invoked directly
from the radio by pressing the 1/EJ button in Bluetooth mode.
After a short delay, your assistant’s chime will play to indicate
it is now listening for your command. Say your command and
the assistant will respond. To dismiss the assistant at any time,
press the 1/EJ button again.
CALL HANDLING
When an incoming phone call is ringing, you can answer the
call by pressing the 5/PROG button. To reject an incoming call,
press the 1/EJ button. During a call, it can be ended by press-
ing the 5/PROG button.
AUTOMATIC SOURCE SWITCH FOR CALLS
To ensure an incoming call is not missed, the radio will au-
tomatically switch to Bluetooth mode if a call comes in while
another source is selected.
DOLBY
®
NOISE REDUCTION
Note that it is still possible to engage Dolby Noise Reduction in
Bluetooth and aux mode. However, it should NOT be enabled
as it causes decreased audio clarity. It is disabled by default,
but if a
icon is shown on the display, press the 2 button to
disable it.
4
