Cansec Zodiac Link, Руководство оператора

Страница: 6 / 32

Zodiac Link Page 6 of 32
Operator Guide June 2012 • Rev. 1.2
Administrators
On the very first power up of Zodiac Link, the unit’s memory is blank. This
is known as virgin mode (factory default). The following message will scroll
on the LCD screen:
“The unit is in virgin mode. Setup required press PGM key *****”
Press
PGM . You will be asked if you want to add an administrator. While the
reader is in virgin mode, an administrator must be added in order to further
set up the reader.
Press
1 (YES). The reader will issue a Personal Identification Number (PIN)
number from 1 to 9. Record the PIN.
The fingerprint scanner will turn on; place a finger on the scanner. When
the message “Remove and Verify” appears on the display, remove and replace
the finger on the scanner.
If scanning was successful, the message “Function Complete” will be
displayed and you will enter the SETUP menu. If the scanner does not
successfully capture your fingerprint the message “Scanner Timeout” will be
displayed and you will have to attempt to add an administrator again.
Up to 9 administrators may be enrolled. If there is only one administrator
enrolled, and because an administrator can only enroll a single fingerprint
template, it is recommend that you enroll yourself a second time as an
administrator, with an alternate fingerprint. This will give you another
opportunity to enter the menu in case there is ever a problem reading your
Primary Fingerprint.

Press the ESC key at any time to cancel entries in progress or to bring
you to the previous menu.

When in Admin or Setup menu, press the PGM key to exit the menu
immediately if desired.

If no key is pressed for 45 seconds the reader will automatically exit the
menu.