Canovate A-PDU, Руководство пользователя

Страница: 11 / 24

Canovate Elk.End.Tic.A.S
11
2- Environmental Monitoring
Navigate to “ Environmental Monitoring ”, then “ Sensors ”.
Users can monitor status of connected sensors from this section. To view the sensor status, first enable monito -
ring for corresponding sensor in Configuration section.
By default, one temperature and humidity sensor is automatically recognized once plugged.
3- Power Monitoring
Navigate to “ Power Monitoring ”, then “ Energy Meter Feeds ”.
You can monitor voltage (Volt), current (Ampere), power (Kw) and energy measurements from this screen.
For Temperature & Humidity sensors, graph will automatically be generated.
It only shows values for last 2 hours.
Users may right-click on graph and save it as picture.
In general, monitoring in broader scope is done by dedicated environmental monitoring units, with which our
IP-PDU can integrate over SNMP protocol.