Trouble-shooting guide
The amplifier is completely broken: power cord is not properly connected to the mains
Solution: connect the cable properly
No input signal to one or both channels:
Solution: select correct signal source using the input buttons
Verify that the input signal cables are properly connected.
Verify that the output signal cables are properly connected to the speakers.
Lack of bass output, impossible stereo location:
Solution: Check polarity of speaker connection
Caution! Inside your CANOR TP101 MKII amplifier there are no parts or
adjusting features that user can set or correct
Service
Should you encounter a problem which you are not able to alleviate or identify despite above
information, please contact your dealer for further advice. Only when the problem cannot be
resolved should the unit be sent to the responsible distributor in your country.
European Community Directives
This product is designed and manufactured in order to comply with existing laws of the
European Community. This product is certified by testing laboratory and bears the CE mark.
Revision 12.2008
Specification:
Output power
2 x 50 Watt RMS / 4 and 8 Ohm
Input sensitivity
250 mV / 50 Watt
Input impedance
100 kOhm
Harmonic distortion
0,1 % (1 kHz, 5 Watt)
Frequency range
20 - 20 000 Hz + -0.2 dB / 5 Watt
Signal to Noise ratio
90 dB
Tubes
1x 12AX7, 2x12AT7, 4x EL 34
Power
230 V, 50 Hz, 250 VA
Dimensions (w x h x d)
450 x 185 x 375 mm
Weight
23 kg
